User Manual FG8 Hot and Cold Cooler www.KoolTekCoolers.com...
Page 2
Do not use an adapter plug with this appliance. • Do not use an extension cord with this appliance. If the power cord is too short, have a qualified electrician install an electrical outlet near the appliance. Kool Tek G8 Hot and Cold Water Cooler Manual...
Page 3
5. Turn water on and wait 5 minutes to allow tanks to fill. 6. Once tanks have filled, test each faucet to ensure steady stream. 7. Turn on hot switch. 8. Check for leaks on all connections. Kool Tek G8 Hot and Cold Water Cooler Manual...
Page 4
# 3) Place jug/container under drain valve and remove drain cap and drain plug al-lowing rinse water to drain. When the rinse water stops flowing, re-install the drain plug and drain cap and tighten. The cleaning process is now complete. Kool Tek G8 Hot and Cold Water Cooler Manual...
Page 5
If this happens, unplug the dispenser overnight and then reset. Set thermostat to a warmer setting, slowly increasing based on your use and need for cold water. Kool Tek G8 Hot and Cold Water Cooler Manual...
Page 6
When not using the dispenser for long periods of time or when going on vacation, con- serve energy, unplug the dispenser and drain the reservoirs (see Draining the Reser- voirs). Follow Initial Product Cleaning Procedures upon return and startup of the dispenser. Kool Tek G8 Hot and Cold Water Cooler Manual...
Page 7
Water Water dispenser is Make sure the dispenser is on an even dispenser is uneven. surface that can support its weight noisy Kool Tek G8 Hot and Cold Water Cooler Manual...
Page 8
Kool Tek G8 Hot and Cold Water Cooler Manual...
Need help?
Do you have a question about the FG8 and is the answer not in the manual?
Questions and answers