Table of Contents
Advertisement
Quick Links
ENDAT-GX201 USER'S MANUAL
ENDAT-GX201 USER'S MANUAL
UNICORN COMPUTER CORP.
UNICORN COMPUTER CORP.
ENDAT-GX201
Copyright Notice
The content of this manual has been checked for accuracy. The manufacturer
assumes no responsibility for any inaccuracies that may be contained in this
manual. The manufacturer reserves the right to make improvements or
modification to this document and/or the product at any time without prior
notice. No part of this document may be reproduced, transmitted, photocopied or
User's Manual
translated into any language, in any form or by any means, electronic, mechanical,
magnetic, optical or chemical, without the prior written permission of the
manufacturer.
Rev. 1A
AMD is registered trademark of AMD Technology Incorporation
GEODE and GEODE GX is registered trademark of AMD Technology Incorporation
Realtek is registered trademark of Realtek Technologies Inc.
Multiscan is a trademark of Sony Corp of America
IBM, EGA, VGA, PC/XT, PC/AT, OS/2 and PS/2 are registered trademarks of
International Business Machines Corporation
Intel is a registered trademark of Intel Corporation
Plug and Play is registered trademarks of Intel Corporation
Microsoft, Windows and MS-DOS are trademarks of Microsoft Corporation
AMI is a trademark of American Megatrends Inc.
PCI is a registered trademark of PCI Special Interest Group
Other product names mentioned herein are used for identification purpose only and
may be trademarks and/or registered trademarks of their respective companies.
Installation Notice
The manufacturer recommends using a grounded plug to ensure proper
motherboard operation. Care should be used in proper conjunction with a grounded
power receptacle to avoid possible electrical shock. All integrated circuits on this
motherboard are sensitive to static electricity. To avoid damaging components from
electrostatic discharge, please do not remove the board from the anti-static packing
before discharging any static electricity to your body, by wearing a wrist-grounding
strap. The manufacturer is not responsible for any damage to the motherboard due
to improper operation.
For GX201 PCB ver. 1C or later
03/02/2007
- 1 -
- 2 -
Advertisement
Table of Contents
Summary of Contents for Unicorp Computer ENDAT-GX201
- Page 1 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. ENDAT-GX201 Copyright Notice The content of this manual has been checked for accuracy. The manufacturer assumes no responsibility for any inaccuracies that may be contained in this manual. The manufacturer reserves the right to make improvements or modification to this document and/or the product at any time without prior notice.
-
Page 2: Table Of Contents
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. Specification: TABLE OF CONTENTS Model ENDAT-GX201 CHAPTER 1. INTRODUCTION............6 Form Factor Mini-ITX 170 mm x 170 mm (6.69”x6.69”) AMD GEODE GX 500 processor @ 1.1W power consumption 1-1. -
Page 3: Chapter 1. Introduction
4-3. DRIVER UTILITY INSTALLATION GUIDE..........49 system board as an ultimate solution integrated with AMD GEODE GX technology CPU. ENDAT-GX201 is not only the ideal solution for Hi-End POS systems, but also could be well CHPATER 5. LAN ADAPTER ............50 adapted to various applications such as kiosks, networking systems, controlling terminals and other embedded systems with FANLESS environment. -
Page 4: Features
Integrated 2D graphics controller resolutions up to 1600 x 1200 for Note: CRT/LCD monitor. The standard version of ENDAT-GX201 will not equip any optional feature Direct Flat panel interface supports 24-bit TFT/LVDS LCD panel, the listed above. resolution up to 1280 x 1024 x 24. -
Page 5: Unpacking
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. 1-2. Unpacking 1-4. MOTHERBOARD LAYOUT The motherboard comes securely packaged in a sturdy cardboard shipping carton. In addition to the User's Manual, the motherboard package includes the following items: •... -
Page 6: Jumpers And Connectors
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. Jumpers Overview: Chapter 2. Setting up the Motherboard Function Jumpers/Connectors Clear CMOS JBAT1 LCD Voltage Selector 2-1. Jumpers and Connectors LVDS Trigger Edge Selector Header for Case Panel... - Page 7 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. JP2, JP4: COM Port Voltage Selector (2x6 with 2.0mm) Part 1: Onboard Jumpers Voltage +12V(DC) R.I. * +5V(DC) COM1 (JP4) JBAT1: CMOS Data Clear (1x3 with 2.0mm) COM2 (JP4)
- Page 8 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. FDD1: FDD Box Header (2x17 with 2.54mm) Part 2: Onboard connectors Pin No. Description Pin No. Description VGABH1: CRT Box Header Connector (2x8 with 2.54mm) 1,3,5,7 DSA# Pin No.
- Page 9 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. IDE1 Box Header (2x20 with 2.54mm) IDE1B: Slim IDE1 Connector (2x22 with 2.0mm) Pin No. Description Pin No. Description Pin No. Description Pin No. Description IDE Reset# IDE Reset#...
- Page 10 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. TTL1: TTL LCD Panel Box Header (2x22 with 2.0mm) JUSB1: Pin Header for USB port (2x5 with 2.54mm) Pin No. Signal Pin No. Signal Pin No. Function Pin No.
- Page 11 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. CN7: DIGITAL I/O Pin Header (2x13 with 2.0mm) CN11: LINE OUT (1x4 with 2.54mm) Pin No. Function Pin No. Function Pin No. Function Pin No. Function DIO-O0 DIO-O4...
-
Page 12: Installing Memory
2-2. Installing Memory Pin No. Function Pin No. Function The ENDAT-GX201 CPU board offers one 184pin DDR DIMM socket supporting up to –TXD 512MB of memory. The DDR memory can be DDR200, DDR266, DDR333 or DDR400. +RXD +TXD 2-3. Shared VGA Memory –RXD... -
Page 13: Watch Dog Timer
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. Sample code (using TurboC/C++ 3.0): 2-5. Watch Dog Timer #include <dos.h> #include <stdio.h> H/W jumper: #include <conio.h> #include <iostream.h> #include <process.h> JP5: Pin 14, Pin 15, WDT Function Enable (close) Disable (open). -
Page 14: Digital I/O
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. 2-6. Digital I/O void init(unsigned char flag,unsigned char time) 16 Bits Digital I/O (CN7) unsigned char tmp0; outportb(RUNTIME_REG_BASE+WDT_GP60_TYPE_OFFSET,0x0d); //Disable WDT function I/O type: Unidirectional for 8 bits input and 8 bits output with buffer (set it as input). - Page 15 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. Control register configuration (GPIO4 to GPIO7): 8 Bits Digital I/O (UBIO1) Pin No. Function I/O type: bidirectional for 8 bits I/O without buffer BIT0 Input/Output Output Input Polarity...
-
Page 16: Pc104
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. 2-8. PC104 IRQ Resources Please set the item “Resources Controlled By” as “Manual” from “Auto (ESCD)”, then reserved one or more interrupt number for interface usage. Available number is: 3/4/5/7/10/11/14/15. -
Page 17: Chapter 3. Award Bios Setup
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. 3-1. Standard CMOS Features Chapter 3. AWARD BIOS SETUP The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Hard Disk Drive settings. -
Page 18: Advanced Bios Features
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. 3-2. Advanced BIOS Features 3-3. Advanced Chipset Features This section allows you configuring your system for basic operation. You have the This section allows you to configure the system based on the specific features of opportunity to select the system’s default speed, boot-up priority, keyboard... -
Page 19: Integrated Peripherals
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. ˙Resolution 3-4. Integrated Peripherals The IDE hard drive controllers support up to two separate hard drives. These drives This field is used to select the resolution of LCD panel. - Page 20 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. IDE HDD Block Mode ˙ ˙Decode I/O Addr. 0~5 [15:4] Block mode is also called block transfer, multiple commands, or multiple sectors Set the Decode I/O base address (0~5, the available range of this value is “0001”...
-
Page 21: Power Management Setup
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. ˙Decode Memory Speed 0~3 3-5. Power Management Setup The Power Management Setup allows users configuring the system to save energy Set the Decode Memory speed 0~3 in a most effective way while operating in a manner consistent with their own style of <Choice: Subtractive Speed/Slow Speed/Medium Speed/Fast Speed>... -
Page 22: Pc Health Status
Disabled The BIOS will not reset the configuration data. 4-1. Graphic controller Feature Resources Controlled By The ENDAT-GX201 integrated a high performance with low power consumption 2D ˙ graphics engine. The graphics controller is full compliance and compatibility with Auto(ESCD) The system will automatically detect the settings for you. -
Page 23: Lcd Flat Panel
UNICORN COMPUTER CORP. Operation guide: 4-2. LCD Flat Panel The graphics controller of ENDAT-GX201 is only support VESA timing for all LCD configurations; please make sure the LCD which applies on this board is fully compliant with VESA standard timing. - Page 24 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. ˙HSYNC Polarity H/W jumper: This field is used to select the polarity of HSYNC for LCD. Default is “Low”. JP8: LCD / CRT selector (1x3 with 2.0mm) <Choice: Low/High>...
-
Page 25: Driver Utility Installation Guide
When finishing the installation of Windows XP, please install the relative AMD display and AUDIO driver manually for compliance compatibility of hardware environment. The ENDAT-GX201 integrated two 10/100 Fast Ethernet Controllers by two Realtek RTL8100C chips. Both of two chips complies with the IEEE 802.3x standard, IEEE802.3 Please contact sales department of UNICORN for Embedded OS user driver standard and PCI Local Bus version 2.2 and transmits data on the network at 100 Mbps or 10... -
Page 26: Utp Cable/Rj-45 Jack Definition
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. 5-2. UTP Cable / RJ-45 Jack Definition 5-3. Connecting 100Base-TX Fast Ethernet Network Straight through twisted pair cable is typically used to connect a hub to a server or workstation. -
Page 27: Appendix A: Flash Memory Utility
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. To access this program, insert the Driver Diskette into the floppy disk drive or other bootable Appendix A: FLASH Memory Utility device (such as USB flash disk) and then type the following at the DOS prompt: A:\REST8139.EXE <ENTER>... - Page 28 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. FDD1: FDD Box Header (2x17 with 2.54mm) Appendix B: Connector Pin Assignment Pin No. Description Pin No. Description 1,3,5,7 DSA# 9,11,13 MOB# VGABH1: CRT Box Header Connector (2x8 with 2.54mm) 15,17,19 Pin No.
- Page 29 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. IDE1 Box Header (2x20 with 2.54mm) IDE1B : Slim IDE1 Connector (2x22 with 2.0mm) Pin No. Description Pin No. Description Pin No. Description Pin No. Description IDE Reset#...
- Page 30 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. TTL1: TTL LCD Panel Box Header (2x22 with 2.0mm) JUSB1: Pin Header for USB port (2x5 with 2.54mm) Pin No. Signal Pin No. Signal Pin No. Function Pin No.
- Page 31 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. CN7: DIGITAL I/O Pin Header (2x13 with 2.0mm) CN11: LINE OUT (1x4 with 2.54mm) Pin No. Function Pin No. Function Pin No. Function Pin No. Function DIO-O0 DIO-O4...
-
Page 32: Appendix C: Limited Warranty
ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. D-SUB Type Connector for COM2 port (RS-485 2 Wire) Appendix C: LIMITED WARRANTY Pin No. Function Pin No. Function Data – Standard one year limited warranty on all our ENDAT series all-in-one Data + motherboards and embedded board. - Page 33 ENDAT-GX201 USER’S MANUAL ENDAT-GX201 USER’S MANUAL UNICORN COMPUTER CORP. UNICORN COMPUTER CORP. Issue Code of defect. RMA SERVICE REQUEST FORM 01 Second Times R.M.A. 11 Memory Socket Bad When requesting RMA service, please fill out this “RMA Service Request Form”.