Replacing the Battery
Your Rz2 remote control comes with one CR2032 battery which must be installed.
When the range of the remote seems reduced or if it ceases to work properly, it's time
to replace the battery.
1. Slide battery compartment cover on rear of remote
control off (remove old battery if replacing).
2. Place new CR2032 in battery well as shown
(make sure +/- polarity matches markings).
3. Replace battery compartment cover.
WARNING: Lithium batteries can explode or cause burns
if disassembled, shorted, recharged, exposed to water,
fire, or high temperatures. Do not place loose batteries in
a pocket, purse, or other container containing metal
objects, mix with used or other battery types, or store with
hazardous or combustible materials. Store in cool, dry,
ventilated area. Follow applicable laws and regulations
for transport and disposal.
Troubleshooting
Problem: Remote doesn't work
Solutions:
A.
Make sure you are within 15 feet of the unit and that the remote is pointed at the
front of the unit.
B.
Try replacing the battery (see above).
For customer service, contact us toll free at 1-800-288-2792
RZ2 IB-121610-A(iP2/iP3)
Printed in china
Battery compartment
cover
3
Rz2
bass
treble
reset
Rz2
remote control
instruction booklet
Need help?
Do you have a question about the RZ2 and is the answer not in the manual?
Questions and answers