Advertisement
EPG (Electronic Program Guide)
PC Settings (only available in PC mode)
•
Auto Adjust: Adjust the PC picture display automatically.
Press EPG button on the remote control, the electronic program guide
•
Horizontal Position: Adjust the horizontal position of picture.
will appear in the center of screen. The electronic program guide gives
•
Vertical Position: Adjust the vertical position of picture.
the TV program playing project. You can use left/right arrows to switch
•
Clock: Adjust the clock of picture.
pages.
•
Phase: Adjust the phase of picture.
•
Reset: Reset all the PC picture settings to factory default.
OSD Menu Operations
Color Temperature
This option allows you to select one of three automatic color
adjustments: Cool for a bluer palette of picture colors; Normal or
Adjust the OSD Screen
Warm for a redder palette of color.
Advanced Picture Settings (not available in PC mode)
The OSD (On Screen Display) menu enables you to approach to the TV
functions.
•
Dynamic Contrast: Set dynamic contrast Off/low/Medium/High.
•
Film Mode: Set film mode on/off.
To use OSD menu system, press MENU button on remote control,
•
Noise Reduction: Set noise reduction as Off/low/Medium/High.
then use left/right arrow to highlight an option from PICTURE, SOUND,
•
MPEG Noise Reduction: Set MPEG noise reduction as Off/low/
CHANNEL, PARENTAL, SETUP or OTHERS and press ENTER/down
Mediumor High.
button.
Note: Noise reduction helps to reduce the picture "static" or
Press the up and down arrow to move to a different option within each
any type of interference. This feature is especially useful for
menu. If necessary, press ENTER or right arrow to display the choices
providing a clearer picture in weak analog signal conditions.
of the option you've highlighted. If available, use the text at the bottom
The MPEG Noise Reduction specifically works on video signal
of each screen for help. To return to the previous menu, press the
with MPEG coding.
MENU button.
Sound Menu
To exit the OSD menu:
•
Press the EXIT button. The menu will clear from the screen.
The Sound Menu lets you adjust audio output. To access the Sound
•
Press the MENU button repeatedly until the menus disappear.
Menu, press MENU on the remote, and then select SOUND from the
Main Menu. Press ENTER/down button to proceed to SOUND menu.
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
Use up/down to choose the function you need, press ENTER or right
arrow to adjust or enter a sub-menu. Thesub-menu image and
explanation are shown below.
Picture Menu
Sound Settings
•
Sound Mode: Choose the preset sound mode of your TV:
Standard, Soft, User, Dynamic. Only in User mode you can
The Picture Menu contains menus and controls to configure the way
adjust Bass, Treble, Balance.
the picture appears. The Picture Menu options apply to the video for
•
Bass: Adjust the bass component of TV sound.
the main TV and VIDEO INPUT selections. All picture options can be
•
Treble: Adjust the treble component of TV sound.
applied to each input.
•
Balance: Adjust the balance between the left and right channel.
Press MENU on the remote. Select Picture from the Main menu. Press
the ENTER/down button to proceed to PICTURE menu.
Surround Mode
Creates a 3D sound surround from standard stereo material, with
PICTURE
SOUND
CHANNEL PARENTAL
SETUP
OTHERS
deep and rich enhancement.
Auto Volume
Picture Settings
Set auto volume control on/off.
Screen Size
Wide
Analog Sound
PC Settings
Color Temperature
Warm
Select analog TV audio sound type: Stereo, Mono or SAP (only
Advanced Picture Settings
available in TV mode).
Digital Sound
Select digital TV audio language type: English, French or Spanish
(only available for DTV channel).
Equalizer Settings
The seven-band graphic equalizer allows you to adjust the audio
Use up/down to choose the function you need, press ENTER or right
frequency settings. You can select one of the equalizer presets
arrow to adjust or enter a sub-menu. The sub-menu image and
(Off, Pop, Rock, Jazz) or create your own personal preset (User).
explanation are shown below.
Press the left or right arrow to select the frequency (100Hz, 250Hz,
If available, use the text at the bottom of each screen for help.
500Hz, 1KHz, 2KHz, 4KHz, 10KHz) you want to adjust. Use the
up or down arrow to adjust.
Picture Settings
Channel Menu
Picture Mode: Choose the preset visual mode of your TV:
Standard, Movie, User, Dynamic, Power Saving. (Only in User
mode you can adjust Brightness, Contrast, Color, Tint and
The Channel Menu enables you to search, view and edit channels. It is
available in TV mode only. Press MENU and choose CHANNEL from
Sharpness. Changes to Power Saving mode can decrease the
the Main menu. Press the ENTER/down button to proceed to
power consumption.
CHANNEL menu.
•
Brightness: Adjust the brightness of picture.
Use up/down to choose the function you need, press ENTER or right
•
Contrast: Adjust the contrast of color.
arrow to adjust or enter a sub-menu. Thesub-menu image and
•
Color: Adjust the richness of color.
explanation are shown below.
•
Tint: Adjust the balance between red and green level (only
available in NTSC signal).
Channel List
•
Sharpness: Adjust the sharpness level of picture.
Displays a channel list. It shows the current channels.
Screen Size
Favorite List
Screen Size: Select a screen aspect ratio. (Available ratio: Wide,
Displays a favorite channel list. It shows the current
Cinema, Zoom, and Normal.) Please choose the ratio that applies
favorite channels.
to your video signal format best.
8
Channel Settings
Note:
These ratings are available only if the broadcaster is sending
rating information.
Go to channel setting sub-menu.
Channel: Press up/down arrow to switch the channel you want to
Block Unrated Show
edit.
Block all the unrated program.
Skip: Set if the current channel is skipped.
Favorite: Set if the current channel is the favorite channel.
Downloadable Rating, Clear Downloadable Data
Label: Enter a channel label to rename the current channel.
Activate or downloadable rating data. if available.
Signal Type
Change Password
Select your TV signal type: Air or Cable.
Change the password of parental menu.
Auto Channel Search
Old PIN: Input the old password.
Execute an auto channel search (see page 7).
New PIN: Input the new password.
Confirm: Input the new password again to confirm.
Parental Menu
Remote
The Setup Menu enables you to lock program with special content,
Select your Remote: Off, Remote1 or Remote2. This is for special
panel key board and input source. Press MENU and choose
purpose.
PARENTAL from the Main menu. Press the ENTER/down button to
proceed to PARENTAL menu.
Keypad Lock
Select this option to block or unblock the TV's panel buttons so
Lock Parental Control
that they can't be used.
• When the Parental Control Menu is accessed from the Main
Menu, you need to enter password to unlock the menu function.
Source Lock
Please enter your four-digit password with numeric keys 0~9.
This option allows you to lock or unlock the input source. The
Note: The original password is "0000".
source blocked can not be chosen from input list unless you input
• After unlocking, the items in parental control menu can be used.
the correct parental password.
Use arrow up/down to highlight the function you need and press
Use up/down arrow to select the source, press ENTER to lock or
ENTER or right arrow to use V-chip, Change Password, Keypad
unlock it.
Lock and Source Lock, Clear Channel List sub-menu.
Clear Channel List
V-Chip
This option allows you to execute Clear Channel List function. This
Press ENTER or right arrow to enter V-chip sub-menu, the detail as
function will reset the whole TV system to factory default (not only
follow:
reset OSD menu).
US V-Chip
Setup Menu
Press ENTER or right arrow to enter US V-Chip ratings menu,
which contains two sub-menus: Movie Rating and TV rating. See
next page for more details.
The Setup Menu lets you config the TV with your preferences. Select
SETUP from the Main Menu. Press ENTER/down button to proceed to
Movie Rating
SETUP menu.
Use arrow keys to select the rating level you want to block, press
ENTER to lock/unlock the rating level. If you have blocked a lower
Use up/down to choose the function you need, press ENTER or
level rating, the higher ratings will be blocked too.
right arrow to adjust or enter a sub-menu. The sub-menu image
For example, when PG-13 is blocked, R, NC-17 and X will be
and explanation are shown below.
blocked at the same time.
Closed Caption
TV Rating
Press ENTER or right arrow to enter Closed Caption sub-menu,
Similar with Movie Rating. After adjusting, press MENU to return or
the detail as follow:
press EXIT to exit the menu.
Caption Display
TV Rating Overview
Press left/right arrow to select caption display on or off.
Age-Based Ratings
Content Themes
Analog Caption Type
TV-MA Mature Audience Only
D
Sexually Explicit Dialogue
Press left/right arrow to select analog closed caption type: CC1,
CC2, CC3, CC4, TEXT1, TEXT2, TEXT3, TEXT4.
TV-14 Parents Strongly Cautioned
L
Adult Language
Digital Caption Type
TV-PG
S Sexual Situations
Parents Guidance Suggested
Press left/right arrow to select digital closed caption type: Service1,
Service2, Service3, Service4, Service5, Service6.
TV-G
General Audience
V
Violence
Digital CC Preset
Directed to Children 7
TV-Y7
FV Fantasy Violence
Press left/right arrow to select digital closed caption preset: Default,
Years and Older
Custom. Only in custom mode you can adjust the digital closed
TV-Y
All Children
caption style.
For more rating explanation, see page 12.
Digital CC Style
Canada V-Chip
Press left/right arrow to go to digital closed caption style sub-menu,
to select the closed caption style.
Press ENTER or right arrow to enter US V-Chip ratings menu,
Select the item you want to adjust in Digital CC Style menu with
which contains two sub-menus: English Rating and French Rating.
up/down arrows.
English Rating
After changing, you can preview the caption style in the bottom.
Press ENTER or right arrow to enter English rating menu.
Menu Language
Use arrow keys to select the rating level you want to block, press
To choose your menu language, press the left/right arrow until the
ENTER to lock/unlock the rating level. If you have blocked a lower
language you need appears.
level rating, the higher ratings will be blocked too.
Available languages: English, French and Spanish.
For example, when PG is blocked, 14+ and 18+ will be blocked at
the same time.
Menu Transparency
French Rating
To choose your menu transparency mode, press the left/right
Press ENTER or right arrow to enter French rating menu.
arrow until the transparency you need appears: Off, Low, Medium,
Similar with English Rating.
High.
9
Video Style
DVD mode. The DVD will start playing automatically if there is a disk in
DVD module. If not, the TV will display a standy screen as shown. And
If you connect the HDMI/DVI port of PC to HDMI jack of the TV
a "No Disc" message will appear on screen.
and the video signal is 1080p, please choose the compatible video
style: Video, Graphic.
Note: The TV will turn to DVD mode automatically when you insert a
disk, no matter which mode it is now.
Clock
Press ENTER or right arrow to enter Clock sub-menu, the detail as
2. Insert a disk to DVD player
follow:
Insert the DVD disk with reflector surface facing the front of TV.
Time Zone
Select your time zone: Eastern, Central, Mountain, Pacific, Alaska,
Hawaii, Samoa, Newfoundland, Atlantic.
Disk reflector surface facing the front of TV.
Auto Clock
Note: Do not insert with much strength.
Select auto clock on/off. Auto clock helps you synchronize your TV
time to standard time (from DTV signal).
Insert disk gently and the DVD
module will load in the disk
Setup Time
automatically.
Set your TV time manually (needs to turn off auto clock).
3. DVD control
Day of Week
You can control the DVD playing with keypad on DVD module or with
Displays what day it is (can't be adjusted, displays only).
remote control. For operating information, see the follow.
Daylight Saving Time
Keypad on DVD module
Set your daylight saving time on or off (needs to turn on auto clock).
Initial Setup Wizard
): Ejects or loads the disk from DVD module.
EJECT (
To set the initial settings. (see page 7)
PLAY/PAUSE (
): Plays or pauses the DVD disk.
Others Menu
About DVD control buttons on remote control, see page 6, remote control buttons.
The Others Menu lets you config the TV with your preferences in other
4. DVD basic operations
features. Choose OTHERS from the Main Menu. Press ENTER/down
button to proceed to SETUP menu.
Play/pause the disk: After inserting the disk to DVD module, the TV
will play DVD disk automatically. You can use PAUSE button to
Use up/down to choose the function you need, press ENTER or right
suspend the playing. Press PLAY button, the TV will restore playing.
arrow to adjust or enter a sub-menu. The sub-menu image and
explanation are shown below.
Stop playing: During playing, you can use STOP button to stop
playing. If you press STOP once, the DVD will be stopped briefly. Press
Blue Back
STOP again, it will stop completely and the disk in DVD module no
Press ENTER button to select Blue Back on or off. If the Blue Back
longer wheels.
is turned on, the TV will display a blue background when there is
Eject the disk: You can press EJECT button to eject the disk from
no signal input.
DVD module. And press EJECT again, the DVD will load the disk
renewedly.
No Signal Power Off
Going backward or forward: You can press FR for fast review and FF
Press ENTER button to select "No Signal Power Off" on or off. If it
for fast forward. You can also press PREV to return to the previous
is turned on, the TV will shut off after 10-minute no signal time. We
chapter, and press NEXT to skip to next chapter.
suggest you turn on this function when Blue Back is turned on. It
may hurt the LED LCD panel if blue screen is on for too long.
Function menu: Press DVD-M, you will return to the selection menu of
Note: In PC mode, the monitor standby and power off settings
current DVD function. For example, you are using "Audio Selection",
depend on the No Signal Off time.
and you choose "Continue playing", then after selecting, you can press
DVD-M to go back to "Audio Selection" menu while playing.
No Operation Power Off
Title menu: Press TITLE, you can reset the disk to the title menu. It
Press ENTER button to select "No Operation Power Off" on or off.
equals to ejecting and loading the disk again.
If it is turned on, the TV will shut off after a 3-hour no operation
Zoom in: Press ZOOM, you can zoom in the screen for 2 times, 3
time.
times or 4 times from centre. This function provide a better view of the
All Reset
content locate near screen centre.
Subtitle selection: Press SUB-T, you can switch the available subtitles
Press ENTER button to execute reset to TV system. All the settings
will be reset to factory default.
in DVD disk.
Audio language selection: Press AUDIO, you can switch the available
Audio Only
audio language in DVD disk.
Press ENTER button to activate audio only mode. The TV will
Repeat: There are two kinds of repeat, one is regular repeat and the
output only sound and the panel will be turned off. To restore
other is Atop repeat. For regular repeat, press REPEAT button to
normal playing, hold POWER button for three seconds.
switch between chapter repeat, title repeat and all repeat. For A-to-B
Note: The OSD's appearance and color are referred to the actual
repeat, press A-B once to set the repeating origin and press it twice to
appliance.
set the repeating end.
DVD-setup menu: Press SETUP button, a specific setup menu for
DVD will display on screen. This menu is especially prepared for DVD
DVD Operations
control. For menu instructions, see the follow.
5. DVD setup menu
DVD mode of TV LED24B45RQD
A. General setup page
TV LED24B45RQD has a built-in DVD player module, which you can
There exist three sub-menus in DVD setup menu, the first one is
use to watch DVD disk. The following operation guide gives the DVD
General Setup. Press SETUP button on remote control to display
module instruction.
General Setup Page. Press up/down arrow to select the item you
1. How to enter DVD mode for TV LED24B45RQD
want to adjust and press right arrow or ENTER button to activate it.
Press INPUT button on remote control, select "DVD" in the Source
After activating, use up/down arrow to set item value. When you are
Select menu (see page 7), then press ENTER or right arrow to enter
satisfied with the adjustment, press left arrow to return to the upper
10
level of general setup menu. Press left arrow repeatedly, you can exit
Why are there bars on my screen, and can I get
the DVD setup menu. To exit setup menu directly, press SETUP.
rid of them?
TV Display
Most digital video is sent in a 16/9 format which fills your screen, but is
Set the TV display shape.
sometimes sent in 4/3 which does not fill your screen. It depends on
OSD Lang
how the station or device connected to your TV is formatting the video.
If there are bars on the screen,
Set the DVD OSD language as English, French or Spanish.
press the ASPECT button to try a different format that may eliminate
Last Memory
the bars. Some bars can't be removed because of the way the format
Set it on to memorize the last stop point. During playing the DVD,
is sent by the broadcaster. The format changes as you press the
if you change to another mode and then come back to DVD mode,
ASPECT button and the format type is displayed at the bottom of the
it can play automatically from the last stop point.
screen. For more information on screen size, go to page 8.
Note: We suggest you turn off the last memory function unless you
Why does channel search find a lot of channels,
really need it. To turn on this function may influence the lifetime of
but when I try to tune to them, there's nothing
flash memory of DVD module.
there?
B. Speaker setup page
Press SETUP button on remote control to display General Setup Page.
Some channels don't carry programming, such as video On Demand.
Press left/right arrow to choose Speaker Setup Page. The operating
When channels are unavailable, your TV screen is blank or appears like
method is similar with the General Setup Page.
snow. You probably want to remove these channels from your channel
Downmix
list. Remove these in the Channel List Menu. Go to page 9 for more
information.
This option is preset as Stereo. That means the DVD player will
output a two-channel audio signal (L/R) to TV front speakers
Why does it take a long time when I search the
(left/right).
channels at first time?
C. Preference page
Press SETUP button on remote control to display General Setup Page.
If you have both analog and digital channels, the TV is looking for all
Press left/right arrow to choose Preference Page. The operating
available channels in the channel list. If you do have digital channels,
method is similar with the General Setup Page.
the TV is also searching for scrambled channels, non-scrambled
channels, and each sub-channel of that digital channel.
TV Type
Set the TV type as PAL, Auto or NTSC.
Note: American DVD standard is NTSC system, so we suggest you
Troubleshooting
set the TV Type as NTSC. In addition, you can also set it as PAL to
watch some disks with PAL system, or select Auto for convenience.
Audio
Identifying Problems
Set the DVD audio language.
Subtitle
If there are any problems when using the product, please consult the
Set the DVD subtitle language.
list below. If the list does not solve the problem, call our Customer
Disc Menu
Service Center immediately.
Set the DVD disk menu language.
TV Problems
Parental
Set the parental control rating as KID SAF, G, PG, PG13, PGR, R,
The TV can't be turned on.
NC17 or ADULT. To change this option, you need password, and
• Make sure the AC cord is plugged in.
the original one is "0000".
• Check the wall outlet, make sure the AC output works normally and
stably.
Default
• The side panel may be locked (disabled). Use the remote control to
Reset the DVD setup menu options as factory default.
turn on the TV.
• Select the Keypad Lock function in the PARENTAL Menu and press
Frequently Asked Questions (FAQs)
ENTER to uncheck the locking status.
There is no picture or sound but the TV is on and there
is a "No Signal" sign on screen.
What's the most convenient way to view High
• Are you trying to use an input source with no device connected to
Definition (HD) video?
it? For using other video/audio device, make sure the external
device works normally first, then press INPUT and choose the right
Connect an antenna to the TV Input jack to view free local digital
input source.
channels. You may need to purchase an antenna. (See page 4 for
• The Signal Type option may be set incorrectly. Go to page 9 for
more information about antenna setup).
detailed instructions.
Visit www.antennaweb.org for assistance in deciding what type of
• The channel may be blank. Try to search the channel again or
antenna to use to receive the local digital channels available to you.
change another channel.
After entering your location, this mapping program tells you which local
analog and digital stations are available using a certain antenna.
The sound is fine, but the picture is poor.
Are there other ways to view High Definition
• If you can only get black and white pictures from external device
that you've connected to your TV, maybe it is due to the video
(HD) video?
cables is not connected well, or they are connected wrongly.
Check the connection stability first, then check the correctness. For
Besides using an antenna as mentioned above, you can also use a
set-top box to receive digital video. Contact your cable service provider
AV input, the yellow video cable connects to the yellow Video In
jack on the side of your TV. For Component input, the three Y, Pb,
or satellite provider to purchase digital programming and have them
Pr video cables (red, blue, and green) should be connect to the
connect the box to ensure you are viewing channels in the best way.
corresponding input jacks on the side of your TV.
How do I tell an analog channel from a digital
• Check the antenna connections. Make sure all of the cables are
firmly connected to the TV jack on side of your TV.
channel?
• Try adjusting the color features to improve.
Press the DISPLAY button to display the Channel Bar. Look at the top
There is no sound, but the picture is fine.
right corner of the screen. An "A" is displayed for an analog channel.
A "D" is displayed for a digital channel.
• The sound might be muted. Try pressing the MUTE button to
Note: Since the analog TV in America has been cut off, we reserve
restore sound.
analog TV function only for some unexpected use.
• For using AV or Component, remember to connect the device's left
11
Hide quick links:
Advertisement
