iHome IHM79 User Manual page 2

Lock Tab
Separate the Two Speakers
Power Switch
LED
Power Switch
NOTE: This product has magnets in the base of each
speaker. To avoid interference or possible damage, do not
place speakers directly on electronic devices such as
computers or monitors.
Charging the iHM79
Lock Tab
USB Connection
mobile phone
Connect To Audio Source
Using the iHM79
A magnetic base holds the iHM79 together for travel or
storage.
To separate the two speakers, gently pull them apart.
To unlock and expand each speaker, grip the top and bottom
and give a small twist counter-clockwise. DO NOT pull hard
once open, as the built in spring will automatically extend the
speaker to its proper position
To compress and lock speaker, line up lock tab on speaker top
with lock/unlock icon on base. Press speaker down from the
top and twist clockwise to lock in place.
Connecting the iHM79
Power Switch
• Connect a mini-USB plug to the input jack on each speaker.
• Connect the stereo 3.5mm audio plug to the headphone jack
LED
or line-out of any audio device.
• Slide the Power Switch of each speaker to the ON position.
The blue power light will come on.
• Press play on your audio device and adjust its volume to
listen to audio.
Note: the larger USB plug is used for charging only, not
for audio. Please refer to next section for charging
instructions
Charging the iHM79
The iHM79 is powered by a rechargeable battery in each
speaker. When the blue power light dims, or if you start to
notice sound distortion at higher volumes, it's time to recharge
the batteries.
• Connect the larger USB plug to a powered USB port, such as
PSP iPod MP3/MP4
that on a computer. The light on the speaker will turn to red
PC
while charging and turn blue when fully charged.
Laptop
Note: you can continue to listen to the speakers while
they are charging