Advertisement
Connections
* Only use good quality screened USB
and HDMI cables
Digital Terrestrial Antenna
Audio system
Optical Digital Audio
Dolby Digital capable
receivers,
home theatre systems
RF output
Direct connection to
TV, VCR, etc
*Not active in low
power standby
USB (x2)
Use either port for:
Wireless Internet: Connect to TP-Link
Digital audio
model TL-WN821N adaptor (supplied).
adaptor
Export: export recordings to USB storage
(supplied)
device/ memory stick.
RF
RF
OUT
IN
OPTICAL
HDMI
12V
2A
Internet*
Connect to broadband router
using supplied Ethernet cable (or
TV
wireless adaptor - see below)
* required for catch-up TV and
Connect using HDMI (cable supplied -
on-demand functions
only use good quality screened HDMI cables)
Setting up a Wireless Connection
1. Connect TP-Link model TL-WN821N Wi-Fi USB adaptor to one of the USB sockets.
2. Press the Menu key on the remote control and select Network Setup > Connection Type > Wireless.
3. Then, select Network Setup > Wireless Setup > Scan.
4. Choose the required wireless access point from the displayed list (you may need to enter its password).
5. Press the GREEN button on the remote to save the settings.
6. A "Connecting" message is displayed at the bottom of the screen.
Setup
IMPORTANT: Before you switch the unit on, remove the battery insulator tab from the
remote control - you will need it to enter information during the setup process.
When you switch on your HDT-610R for the first time, it may take up to a minute for the unit to
power up and display the Setup Wizard. This will guide you through the process of setting up the
HDT-610R and scanning for Freeview channels. Press the OK button on the remote to begin...
Step 1. Enter PIN
Step 2. Scan for Services
Use the remote to set a parental control PIN code
The receiver will now search for channels. This
(optional - you can do this later, see the User Guide
may take a few minutes.
for details). Press the
BLUE
button to continue.
IR
Step 3. Select your Region*
Step 4. Start Viewing
Power
Use the navigation 'wheel' to highlight your
Press the OK button to watch TV.
Connect to 12V
preferred region. Press the OK button to continue.
power supply
*
You will only see this screen if you can receive signals from more
than one transmitter.
Having problems? For full instructions about connecting your HDT-610R and running the Setup
Wizard, please refer to the User Guide by visiting www.myechostar.com/support.
Getting Started
Watching TV
View programme/
channel information
Switch between TV
TV/R
and radio channels
Change channel
CH
Mute/unmute
(see
Remote Control
Programming
)
Increase/decrease
View subtitles
SUB
sound volume
VOL
(see
Remote Control
Record current programme/
Programming
)
selected programme or series
Using the Programme Guide
Display programme guide
Show later/earlier programme info:
GUIDE
Exit programme guide
EXIT
Navigate guide/menus/
OK
select programme
-2.5 hours +2.5hours -1 day +1 day
Show current schedule
BACK
Next/previous page
PAGE
of channels
Record selected programme
or series
Recorded Programmes
Pause
Display library of recorded
LIB
Play
programmes
Stop
Manage recordings:
Rewind/
Fast forward
Skip back/
skip forward
Delete
Options Sort A-Z Schedule
Text and Interactive Services
View text/interactive
Select Apps icon for
TEXT
MENU
services
Internet-based content.
BBC only: Red button services
Managing Recordings
Viewing the Library
Pause
Press the LIB button on the remote.
Play
Alternatively, press the MENU button and scroll
down to the Library option.
Stop
Making a recording
Rewind/
Press the GUIDE key.
Fast forward
Use the navigation button to highlight the
Skip back/
desired programme.
skip forward
Press the Record key.
Playing a recorded programme
Press the LIB key.
Use the navigation button to highlight the programme and then press the OK button.
Delete a recording
Press the LIB key.
Select the programme's name in the library list and then press the
Confirm that you want to delete the programme by pressing OK.
Delete a folder
Press the LIB key.
Use the navigation button to highlight the folder to be deleted.
Press the
RED
key to delete the folder.
Protecting a recording with a PIN
Press the LIB key.
Select the programme's name in the library list and then press the
change the protection options on the recording. If the recording has previously been
locked, you will need to enter the PIN to unlock it.
Managing Timers
Press the LIB key and then press the
BLUE
key. The Timer list is displayed.
Press the
BLUE
button to cycle between:
The Recordings list.
Ÿ
Ÿ
The Timer list.
Ÿ
The Daily Schedule view.
Export Recording to USB
Connect USB storage device to USB port.
Press the LIB key.
Select the recording in the library list and then press the
Select Export.
Press OK.
RED
button.
GREEN
key to
GREEN
button.
Advertisement
