Listening To A Cd; Pausing Or Restarting Cd Playback; Searching For A Section Within A Track - LG LCS710BR Owner's Manual

14 Operating
For [OTHER] setting
 AUX (Auxiliary) ON / OFF
It is possible to use auxiliary equipment with this
unit. Activate the auxiliary setting when using
auxiliary equipment connected to this unit.
 DEMO OFF / ON
You can change the initial indication on the
display to information name (function name, EQ
name, etc...) while listening to a source.
 BEEP 2ND / ALL
BEEP 2ND : The beep is generated when a key is
pressed for longer than 2 seconds.
BEEP ALL : The beep is generated when any key
is pressed.
 CLK (Clock)
For the model RDS is not supported unit or even
for a RDS supported unit.
- When RDS CT information is not received and
then you set CT to OFF, you can adjust the
time by yourelf. Set the clock as follows ;
3
1. Select a source to TUNER.
F
2. Press the
CT to OFF.
(Refer to the " Adjusting TUNER settings " on
the page 18 for setting the CT (Clock Time)
ON / OFF.)
3. Press and hold ` on the unit to select
[OTHER] and then select CLK by rotating the
volume knob.
4. Set the hour by rotating the volume knob.
5. Press the volume knob to confi rm the hour.
6. Set the minute by rotating the volume knob.
7. Press the volume knob to confi rm the
minute.
- When RDS CT information is received ;
The clock is displayed according to the RDS CT
information.
- When RDS is not supported, set the clock
according to 3 to 7 steps.
to select the CT and then set

Listening to a CD

[LCS710BR / LCS710DAB]
1. Insert a CD.
2. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME W / S on the remote control.
[LCF810BR / LCF810DAB]
1. Press the OPEN to open the control panel.
2. Insert a CD.
3. Close the control panel.
4. Rotate the volume knob on the unit to adjust
the volume.
Or press VOLUME W / S on the remote control.
,
Note
Make sure to press B after pressing OPEN to
eject a disc. Refer to the picture above.
Pausing or restarting CD
playback
1. Press N on the unit to pause playback.
Or press d/M on the remote control.
2. Press it to resume playback.
Searching for a section within
a track / fi le
1. Press and hold A / D on the unit for about 1
second during playback.
Or press and hold c / v on remote control.
2. Press N on the unit at the point you want.
Or press d/M on the remote control.