Page 1
MyLife™ notebook webcam pro 5.0 megapixel max resolution u s er m a n u al IH-W355NB IH-W356NP Congratulations on the purchase of your new MyLife notebook webcam pro. This product comes with a limited lifetime warranty. Before using your product, please thoroughly read and follow the instructions inside this manual.
your package should contain MyLife notebook webcam pro ArcSoft Magic-i™ and WebCam Companion ® installation CD travel pouch USB cable use r man ua l user manual (in your hands right now) user manual contents features • 2 your new webcam • 3 install software • 3 connect hardware • 4 use your webcam • 4 advanced features • 5 special effects • 8 product operating tips • 10...
Select Program Folder dialog box displays. Click Next. After the application finishes installing, an Wizard Complete dialog box displays. Click Finish to exit the wizard. The main software installation screen displays again. Repeat the above steps to install the other application. Click exit on the main software installation screen when done.
advanced features Click Start > All Programs > ArcSoft WebCam Companion 2 > WebCam Companion 2 to open the Start Page. capture still shots or video On the Start Page, click Capture. The Capture window displays. • For a still shot, click Capture.
Page 6
monitor an area ArcSoft WebCam Companion allows you to use your webcam to monitor an area, recording video when there is any motion in the area. To monitor an area: On the Start Page, click Monitor. The Monitor window displays. Click Monitor Settings to configure your monitor.
Page 7
change video settings To change video settings and access other webcam settings, click the WebCam Settings button in the Capture window (see “capture still shots or video” on page 5) or the Monitor window (see “monitor an area” on page 6). The webcam properties dialog box displays.
view and edit still shots and video To view the still shots or video you have captured, click Edit on the Start Page. Here you can also edit your still shots and video, including auto enhancing your photos. Click the Capture tab for recordings made from the Capture window (see “capture still shots or video”...
Page 9
zoom face tracking zoom Your webcam can zoom in as much as 4×. To change the zoom level when using special effects in ArcSoft Magic-i, click the zoom buttons underneath the picture. turn on face tracking Face tracking keeps the camera trained on a person’s face without mechanically moving the camera if the person moves around in the chair.
use other special effects Various other special effects are available under the Effect and Illustration tabs. To turn on a special effect: Select either the Effect or Illustration tab, depending on the effect you want. The Effect tab gives you various image effects, and the Illustration tab gives you different picture frames you can use.
FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a...
Need help?
Do you have a question about the MYLIFE IH-W355NB and is the answer not in the manual?
Questions and answers