netbook cooling pad with 2 built-in fans USB power cable 2 angle position knobs mid-size wireless optical netbook mouse 2 AAA DURACELL ® batteries quick start guide quick start guide (in your hands right now) DPI button low battery indicator USB nano receiver...
contents features • 3 set up cooling pad • 4 connect mouse • 5 connect numeric keypad • 7 product operating tips • 8 troubleshooting • 9 Congratulations on the purchase of your netbook accessory kit. This product comes with a limited lifetime warranty. Before using your product, please thoroughly read and follow the instructions inside this manual. If you still need help, see the back page for other support options.
set up cooling pad insert knobs (optional) To increase the angle at which your netbook will sit on the pad, insert the two knobs into the pre-drilled holes that provide best support for your netbook. position your netbook on the cooling pad connect USB cable to cooling pad...
Page 5
connect USB cables to netbook connect to a USB port on your netbook turn fan on and adjust the fan speed as desired side view SPEED fan speed control power indicator light on / off switch...
Page 7
connect USB nano receiver connect to a USB port on your netbook turn mouse on bottom view of mouse bottom view of mouse On/Off switch optical sensor USB nano receiver storage slot On/Off switch optical sensor USB nano receiver storage slot bottom view of mouse...
product operating tips cooling pad • When the cooling pad is connected and on, the power indicator light glows blue. • Turning the fan speed control to the far right will stop the fan without turning off the cooling pad. • ...
troubleshooting situation try this cooling • Ensure the USB power cable is properly connected. pad fans do not • Ensure your netbook is turned on. work • Ensure the cooling pad power switch is turned to the on position. • Ensure the fan speed control is not turned all the way to the right.
FCC Statement This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC Rules.
Page 11
Responsible party: LifeWorks Technology Group LLC 1412 Broadway New York, NY 10018 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Warning Improper setup, use and care of this product can increase the risk of serious injury, death or device damage. Read and keep this guide and all other printed guides for future reference.
Need help?
Do you have a question about the IH-B931NR and is the answer not in the manual?
Questions and answers