Tidying Cables; Making Connections - LG LN54 Owner's Manual

Tidying cables

1 Secure the power cord with the Power Cable Holder/
Bolt.
2 Gather and bind the cables with the Cable Holder.
CAUTION
Do not move the TV by holding the cable holder,
y
as the cable holders may break, and injuries and
damage to the TV may occur.
ASSEMBLING AND PREPARING / MAKING CONNECTIONS
Cable Holder
Power Cable Holder/Bolt

MAKING CONNECTIONS

This section on MAKING CONNECTIONS
mainly uses diagrams for the LN54** models.
Connect various external devices to the TV and switch
input modes to select an external device. For more
information of external device's connection, refer to the
manual provided with each device.
Available external devices are: HD receivers, DVD
players, VCRs, audio systems, USB storage devices,
PC, gaming devices, and other external devices.
NOTE
The external device connection may differ from
y
the model.
Connect external devices to the TV regardless of
y
the order of the TV port.
If you record a TV programme on a DVD recorder
y
or VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR.
For more information of recording, refer to the
manual provided with the connected device.
Refer to the external equipment's manual for
y
operating instructions.
If you connect a gaming device to the TV, use the
y
cable supplied with the gaming device.
In PC mode, there may be noise associated
y
with the resolution, vertical pattern, contrast or
brightness. If noise is present, change the PC
output to another resolution, change the refresh
rate to another rate or adjust the brightness and
contrast on the PICTURE menu until the picture is
clear.
In PC mode, some resolution settings may not
y
work properly depending on the graphics card.
13