Monitor ™ Digital Answering Machine User Guide If you have any problems with your answering machine, firstly refer to the Troubleshooting section of this User Guide or call our TecHelp line on 1300 369 193.
Copyright Act, no part of it may in any form or by any means (electronic, Wall mounting template mechanical, photo copying, microcopying, scanning, recording or otherwise) be reproduced, stored in a retrieval system or transmitted without prior permission from Telstra Corporation Limited ABN 33 051 775 556 Product Warranty and Customer Service ™...
19 minutes recording capacity Your Monitor™ 420 has been designed for ease of use and made Offers the benefits of digital recording. to the high standards set by Telstra. You can expect your Monitor™ 420 to give you many years of Message Indicator trouble-free service.
Plug the mains power cord into the back of the machine To prevent the mains cable being pulled out accidentally, route the cable through the channel on the base of your Monitor 420. Plug your Monitor™ 420 into a socket Plug the adaptor into a mains power socket The message indicator will light up.
Using your Monitor™ 420 Wall mounting your Monitor™ 420 Wall mounting your Monitor™ 420 Answering machine controls Use the template on page 16 to drill holes in the wall. Leave a small gap between the screw heads and the wall. Place your Monitor™...
Recording your outgoing message Receiving messages After following the set-up procedure your Monitor™ 420 is ready The outgoing message is the message a caller hears when your to receive messages. Monitor™ 420 answers a call. Your Monitor™ 420 answers the call after 6 rings if you have no You can record your own outgoing message.
To play back messages and memos Call screening Press buttons in the order shown When the red light is flashing: Your messages and memos are You can let your Monitor™ 420 answer an incoming call and hear played back in the order they were received until all your the caller’s voice through the loudspeaker so you can decide messages have been played.
Remote Access To switch on your Monitor™ 420 from another phone You can switch on and operate your answering machine from This is useful if you forget to turn on your answering machine another TouchTone phone to play back your messages and before going out.
Troubleshooting Menu for Remote Access If you have any problems using your Monitor™ 420, this section gives you the most common solutions. To hear main menu Press 1. LED does not light up. Check that your Monitor™ 420 is correctly connected to the mains To play all messages.
Product warranty & Customer service Wall mounting template Product Warranty Do you really need service? Telstra Guarantees your product for 12 months from Before calling for service under this warranty have date of purchase against any defect in materials or you :...
Need help?
Do you have a question about the Monitor 420 and is the answer not in the manual?
Questions and answers