Page 1
Register your product and get support at www.philips.com/welcome 32PFL5404/12 32PFL5404/60 42PFL5604/60 32PFL5604/60 42PFL5614/60 32PFL5614/60 22PFL5604/60 22PFL5614/60 19PFL5404/60 User Manual...
Back connectors for 19-22 inch TV Back connectors for 26 inch and larger TV 1 Notice Side connectors Connect a computer Use Philips EasyLink 2 Important Use a Kensington lock 3 TV overview 8 Product information Side controls and indicators...
Page 5
Remove fuse cover and fuse. The replacement fuse must comply with BS 1362 and have the ASTA approval mark. If the fuse is lost, contact your dealer in order to verify the correct type. Refi t the fuse cover. In order to maintain conformity to the EMC directive, the mains plug on this product must not be detached from the mains cord cable.
TV, combined weight of the TV and wall disconnect the TV from the power mount. Koninklijke Philips Electronics outlet immediately. Contact Philips N.V. bears no responsibility for Consumer Care to have the TV improper wall mounting that result in checked before use.
Page 7
• Risk of injury, fi re or power cord damage! Disposal of your old product and Never place the TV or any objects on the batteries power cord. • To disconnect the TV power cord easily from the power outlet, ensure that you have full access to the power cord at all Your product is designed and manufactured times.
Page 8
fl ower– www.ecolabel.eu You can fi nd detailed information on standby energy consumption, warranty policy, spare parts and recycling of this TV on the Philips website for your country at www.philips.com. This TV has features that contribute to energy-effi cient use. This TV was awarded the European Ecolabel for its environmental qualities.
Remote control 3 TV overview This section gives you an overview of commonly used TV controls and functions. Side controls and indicators POWER : Switches the product on or off. The product is not powered off completely unless it is physically unplugged.
Page 10
( Play/Pause ) | SUBTITLE (For RF Digital TV only) Starts, pauses or resumes playback. Enables or disables subtitles. ( Record ) (only used for Easylink features (see ‘Use Philips EasyLink’ on page 31 ) ) Starts or stops video recording.
4 Use your Note product • If you cannot locate your remote control and want to switch on the TV from standby, press P/CH +/- or SOURCE at the side of the TV. This section helps you perform basic operations (see ‘Use more of your product’...
Switch channels with the channel grid Adjust TV volume The channel grid allows you to view all available channels in a grid format. Press OK. » The channel grid appears. Press to browse the channel grid and preview a channel. »...
Remove devices from the 5 Use more of home menu your product If a device is no longer connected to the TV, remove it from the home menu. Access TV menus Press ( Home). Press to select a device to Menus help you to install channels, change remove.
Use smart picture • [Tint]Adjusts the colour balance in an image. Use smart picture to apply pre-defi ned • [Custom tint]Customises tint setting. picture settings. • [Pixel Plus HD]Adjusts picture quality to Press PICTURE. optimal contrast, colour and sharpness. » [Smart picture] menu appears.
Page 15
Use smart sound [Auto format](Not for HDMI, YPbPr - EXT2/ Use smart sound to apply pre-defi ned sound EXT3 or PC mode.) settings. Enlarges the picture Press SOUND. automatically to best fi t » [Smart sound] menu appears. the screen. The subtitles remain visible.
• [Surround]Enables spatial sound. Select teletext subpages • [Headphone volume]Adjusts A teletext page can hold several subpages. headphone volume. Subpages are displayed on a bar next to the • [Auto volume]Automatically reduces main page number. sudden volume changes, for example, Press MHEG/TELETEXT .
Press OK to select [Show favourite ch.]. » The favourite lists appear. • When watching TV, press OPTIONS > [Mark as favourite] to save the current Press to select a favourite list. channel into a favourite list. Press OK. » Only channels in the favourite list appear in the channel grid.
Use TV lock Press ( Home). Press to select [Setup] > You can prevent your children from watching [Features] > [Sleeptimer]. » certain programs or certain channels by locking [Sleeptimer] menu appears. the TV controls. Press to set the sleep time. »...
Lock or unlock the TV Use the TV clock Lock the TV to prevent access to all channels You can display a clock on the TV screen. and connected devices. Press ( Home). Set the TV clock Press to select [Setup] > [Features] >...
Personalize the Scenea picture Use sleeptimer with Scenea wallpaper By default, your TV displays the Scenea picture or While the TV is on, connect the USB slideshow for 120 minutes before entering standby storage device containing your pictures mode. If sleeptimer is enabled, the Scenea picture (JPEG format only) to the USB connector or slideshow is displayed for the duration of the at the side of your TV.
Caution • Philips is not responsible if the USB storage View a slide show of your photos device is not supported, nor is it responsible for damage or loss of data from the device. When a full screen image of a photo is...
Update the TV software You can map channels provided through a decoder or descrambler to your TV channel Philips continuously tries to improve its selection. In this way, you can select these products and we recommend that you update channels by using the RC of your TV. The the TV software when updates are available.
Press to enter [Decoder]. Press to enter [Channel]. Press to select channel number to map to the decoder/descrambler channel. Press OK. Press to select and enter [Status]. Press to select the connector used by the decoder/descrambler ( [None] or [EXT 1]). Press OK.
6 Install channels Step 2 Install Channels Select your country for proper channel installation. The fi rst time you set up your TV, you are Press ( Home). prompted to select a menu language and to Press to select [Setup] > install TV and digital radio channels (if available).
Select your system Press to select [Stop] or [Continue]. Press OK to confi rm your choice. Note When done, press ( Home) to exit. • Skip this step if your system settings are correct. Manually install channels Press ( Home). Press to select [Setup] >...
Reorder channels After you install channels, you can rearrange the order in which they appear. When watching TV, press OK to display the channel grid. Press OPTIONS. » The channel options menu appears. Press to select [Reorder], then press Select the channel to rearrange, then press OK.
7 Connect devices PC IN(AUDIO) This section describes how to connect devices with different connectors. Examples are provided in the Quick Start. Note • You can use different types of connectors to connect a device to your TV. b HDMI 1 Back connectors for 19-22 Digital audio and video input from high- inch TV...
h EXT 2 ( Y Pb Pr and AUDIO L/R ) Analogue audio and video input from analogue or digital devices such as DVD TV ANTENNA players or game consoles. f AV OUT ( VIDEO OUT and AUDIO OUT L/R ) Audio and video output to analogue devices such as another TV or a recording device.
Page 30
PC IN(AUDIO) e EXT 1 ( RGB and CVBS ) / CVBS ( EXT 2 ) Analogue audio and video input from analogue or digital devices such as DVD players or game consoles. EXT2 supports S-Video. b HDMI 1/2 EXT1/ EXT2 Digital audio and video input from high- (RGB/CVBS)/ (CVBS) defi...
Stereo audio output to headphones or earphones. c AUDIO L/R Audio input from analogue devices connected to VIDEO. g SERV. U For use by service personnel only. Side connectors d VIDEO Composite video input from analogue devices such as VCRs. e S-VIDEO S-Video (side) to be used with Audio L/R a USB...
• DVI-HDMI cable For TV of size 22 inch and smaller PC IN(AUDIO) For TV of size 26 inch and larger AUDIO IN : LEFT / RIGHT HDMI 1/ DVI HDMI 2/ DVI f HDMI Digital audio and video input from high- defi...
Your TV supports Philips EasyLink, which Note uses the HDMI CEC (Consumer Electronics • Do not enable Philips EasyLink if you do not Control) protocol. EasyLink-compliant devices intend to use it. that are connected through HDMI connectors can be controlled by a single remote control.
Page 34
Press ( Home). HDMI Device Press to select [Setup] > [Sound] > [TV speakers] > [Auto EasyLink]. » The TV speakers are turned off automatically when content from an HDMI HDMI Easylink compliant system is detected. Press to select [Setup] > [Sound] >...
Disable remote control pass-through • [Dev. root menu]Accesses the root menu of the CD/DVD/game disc. Enable one-touch play and one-touch • [Device setup menu]Accesses the standby between easylink compliant main menu of the connected device devices by following the instructions such as DVD player, HDD recorder, in the previous section (see ‘Enable or or game console.
Supported multimedia fi le formats: Product information is subject to change • Images: JPEG without notice. For detailed product • Audio: MP3 information, go to www.philips.com/support. Note Supported display resolutions • Multimedia fi le names must not exceed 32 characters. Computer formats •...
Supported TV mounts To mount the TV, purchase a Philips TV mount or a VESA-compatible TV mount. To prevent damage to cables and connectors, be sure to leave a clearance of at least 2.2 inches or 5.5cm from the back of the TV.
TV. cable. If the blinking reoccurs, contact • If reception on only one channel is poor, Philips Consumer Care. fi ne tune this channel. You forgot the code to unlock the TV lock There is poor picture quality from connected...
If you cannot resolve your problem, refer to • Check that the volume is not set to 0. the FAQs for this product at www.philips. • Check that the sound is not muted. com/support. There is a picture but the sound quality is...
digital services 10 Index teletext 10 , 14 display resolution Dual view antenna EasyLink disable bracket for wall mount enable one-touch play one-touch standby channel list system audio control 31 , 31 favourite Electronic Programme Guide troubleshooting environmental care Channels favourite list install factory settings...
Page 41
menu Table of Pages main menu technical speciÀ cations teletext teletext MPEG artifact reduction features Multimedia menu technical specifi cations subpages music Table of Pages timer on timer 15 , 16 Sleep timer standby on timer 16 , 15 troubleshooting One-touch play One-touch standby adjust volume...