Related Manuals for argon audio DA2V2
Summary of Contents for argon audio DA2V2
- Page 1 OWNER’S MANUAL ILLUSTRATIONS CONNECTIONS SPECIFICATIONS TROUBLESHOOT RECOMMENDATIONS w w w . a r g o n a u d i o . c o m...
- Page 2 Thank you for choosing Argon Audio DA2V2 amplifier, we should last for many years. Argon DA2V2 is one of very few hope it will bring you many years of enjoyment. true full digital stereo amplifiers on the market. Besides the...
- Page 3 Protect the power cord from on the DA2V2. Now you can connect the audio source you being walked on or pinched, particularly at plugs and the want. (read more about this on page 4 and forward).
-
Page 4: Front Panel
Notice: The above buttons marked with 1-4 are all input selectors that each corresponds to a connection on the back side of DA2V2. w w w . a r g o n a u d i o . c o m... -
Page 5: Rear Panel And Connections
Rear panel and connections Fuse holder, if fuse needs to be replaced only use same type and value. IMPORTANT; remember to unplug the power cable from Connections to left and Out put for mains socket before opening the fuse holder right Passive speakers active subwoofer Input for analogue... -
Page 6: Remote Control
Remote control DA2 comes with a remote control. The remote control is a system remote control that also can control Argon iNet6+ which is an Internet tuner in same family as DA2. The section with the white square around is dedicated to DA2, as well as the Red Power “ON”... -
Page 7: Connecting Your Speakers
DA2V2 SUB OUT. Your subwoofer need to have input for one RCA plug just like there is only one RCA output plug from the DA2V2. Connect using this single RCA plug at both ends. Your Subwoofer might have a Left and Right input. In this case you can choose between two options: Option 1 is to use one single RCA connection on the subwoofer and you can choose either L or R input and leave the other one unplugged. - Page 8 All PC’s have USB AUDIO out. Connection will in most cases be a standard flat USB plug in the PC end and a USB type B plug for the DA2V2. Other audio source products might also have USB AUDIO out. Refer to your audio source manual about this issue.
-
Page 9: Basic Troubleshooting
Notice: If DA2V2 is connected with a Argon iNet6+ they have to be connected only by Optical digital out/in. If iNet6+ is connected to DA2V2 via analogue RCA the volume function on the remote will not work properly Power Management (Auto Stand-by) - Page 10 Argon DA2V2 is part of a small family that also consists of iNet6+. iNet6+ is like DA2V2 a full digital product. iNet6+ is basically an Internet based tuner. Besides access to thousands of Internet radio stations, iNet6+ also has digital DAB+ radio and streaming functionality from PC or UpnP drives.
Need help?
Do you have a question about the DA2V2 and is the answer not in the manual?
Questions and answers