IFSYS-7000 IrDA
The IFSYS -7000 is designed to be used as an add on peripheral IC for any
TM
SIR IrDA
compliant optoelectronic transceiver. It is ideally suited to
applications requiring low cost and low power communication based on the
TM
IrDA
standard. IFSYS-7000 does not require an external crystal; it utilizes
a 16X clock from the host system to provide the 16X baud rate clock for both
encoding and decoding, using infrared pulse widths of 3/16
iFoundry's IFSYS-7000 supports the full complement of IrDA
rates, from 9,600 bps right up to 115,200bps.
Key features
Wide voltage operating range (2.7V – 5.5V). Single power supply
input.
Small form factor 8-pin SOP package.
Operates in 3/16
Operates from an external 16X clock input from the host processor
or UART. Supports the following speeds:
•
9,600bps
•
19,200bps
•
38,400bps
•
57,600bps
•
115,200bps
Sample Block Diagram
www.ifoundrysys.com
Doc. P/N: MDMA01479
© 2007 iFoundry Systems
TM
SIR Endec Chip (SOP8)
th
mode transmit pulse width.
Specifications subject to change
th
the bit time.
TM
V1.1 baud
Product Brief
IFSYS-7000
Rev. 1.80
19 Apr 2007