Download Print this page

Troubleshooting - Witura WT-2000 User Manual

Gsm fixed wireless phone

Advertisement

WT-2000 GSM Fixed Wireless Phone

TROUBLESHOOTING

Troubles
Reasons
(Display on LCD)
1. No display when
1. There is no power for
turn on the phone
the backup battery
1. The phone Card is
installed incorrectly
1. No SIM Card
2. The phone card is
broken
1. The antenna is installed
1. No Signal display
incorrectly
or the signal is
2. No signal or the signal
very weak
is too weak
1. The charger is broken
1. The phone cannot
2. The battery is damaged
be charged
1. Your telephone number
1. The phone has the
is out of charge
signal but cannot
2. The phone have no
make calls
enough power
1. Your phone number is
1. The phone cannot
invalid
register to the
2. No Signal or the signal
networks.
is too weak
WT-2000 – USER MANUAL – Rev1.1 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
Solution
1. Recharge the phone with
power supply
1. Install the phone Card
again
2. Change another phone
Card
1. Install the antenna again
2. Put the Phone to another
place
1. To replace another
charger
2. To change another
battery
1. Please charge your
telephone bill
2. Please charge your
phone
1. Check with your
networks operator
2. Put the Phone to another
place
10
technical@witura.com
WT-2000 GSM Fixed Wireless Phone
5.
When the telephone is being used, it should be placed where signal is strong
enough. In order to ensure good voice quality, the telephone should be far
from other electronic equipment (at least 1 meter far away).
6.
Don't use chemic substance to clean the telephone, but use dry soft cloth to
clean it.
7.
Don't disassemble the telephone by yourself. If there is any problem, please
contact the authorized personnel.
Storage:
1.
The telephone that is packed or not could piled up no more than 10 layers.
2.
The telephone should be saved in ventilate and dry place.
3.
Don't knock the telephone to avoid breaking the case.
KEY FUNCTIONS AND TECHNICAL INDEX
The key characters/ functions of the phone are listed as below:
1.
Suitable for GSM networks
2.
Built-in high quality Industrial Module
3.
Support Hand free, Caller ID, Radial and Second-Dial function.
4.
Support English SMS and Voice Mail
5.
With powerful Phone Book which can store 40 contact names
6.
With Intelligent STK and Security Management
7.
Records history: auto saves the last 20 dialed/received phone numbers, and
last 20 missed calls
8.
Incoming calls bar & unbar, outgoing calls bar & unbar, International calls
bar & unbar enable
9.
Support Call transfer and call waiting
10.
With Dot LCD to display the networks provider, date & time, battery status
and signals strength.
11.
Built-in 5PCS 16 chords music ringing tones
12.
With Alarm clock
13.
Built-in powerful backup battery and the standby time are up to 72 hours.
WT-2000 – USER MANUAL – Rev1.1 – Technical Support:
COPYRIGHT ©2010 WITURA CORPORATION SDN BHD
with powerful signals-receiving ability
3
technical@witura.com

Advertisement

loading