Table of Contents
Advertisement
If you cannot use the side connector, use an HDMI or the EXT2 (YPbPr and Audio L/R) cable to
connect the camcorder to the back of the TV. (On certain models, EXT2 is labelled EXT3).
Channel decoder
NonPu blish
Before using a SCART digital channel
decoder, select the channel to decode and
assign the decoder to the SCART connector.
1. Press
.
2. Select [Setup] > [Channel settings] >
[Decoder] > [Channel].
PC
NonPu blish
Connect a computer using one of the following cables:
HDMI cable
EN
50
3. Set the channel you want to decode.
4. Select [Status], then the location of the
decoder.
5. Press OK.
Advertisement
Table of Contents
