Replacement Of Lcd Panel - Panasonic PT-AE700U Service Manual

6.13 Replacement of LCD Panel

TOP PREVIOUS NEXT
The procedure is described as an example of LCD panel (B).
1. Remove the LCD block according to the section 6.11. "Removal of LCD Block".
2. Cut the 4 LCD panel installation spindles at the position A and remove the LCD panel.
3. Cut the 4 LCD panel installation spindles at the position B and remove them.
Notes:
Work carefully not to apply external force around the spindle part by using a cutter,
cutting nipper or the like for cutting the spindle.
Adjust the height after the spindle is cut to 1 mm or less.
4. Attach the base plate with 4 screws.
5. Tighten the 2 screws temporarily just until new LCD panel (with the panel attachment and
panel adjuster) can be shifted by your fingers.