Bluetooth Audio; Homelink - Honda 2014 Accord Sedan EX-L Reference Manual

BLUETOOTH
Play stored or streaming audio from your compatible phone through your vehicle's audio
system. Visit handsfreelink.honda.com to check if this feature is compatible with your phone.
Playing Bluetooth Audio
1. Make sure your phone is on and paired to Bluetooth
page 27).
2. Select Source and select the Bluetooth icon.
3. From your phone, open the desired audio player or app and begin playing.
Sound is redirected to the audio system. Make sure the volume on your phone
is properly adjusted.
4. Use the touchscreen or steering wheel controls to change tracks.
Notes:
• You may need to enable additional Bluetooth settings on your phone for
playback.
• The play/pause function and remote audio controls are not supported on all
phones.
• Operate your phone only when your vehicle is stopped.
38
AUDIO
®
Select the
Bluetooth icon
from Source.
HandsFreeLink (see
® ®

HOMELINK

Program your vehicle to operate up to three remote-controlled devices around your
home, such as garage doors, lighting, or home security systems.
Training a Button
1
Position the remote transmitter you
wish to link 1–3 inches from the
HomeLink button you want to program.
2
Press and hold the desired HomeLink
button and the button on the remote
transmitter.
Does the HomeLink indicator (LED) blink at a
faster rate after about 10 seconds?
NO YES
a
Press and hold the button on the
remote and the HomeLink button at
the same time. Then, while
continuing to hold the HomeLink
button, press and release the button
on the remote every 2 seconds.
Does the LED blink at a faster rate within 20
seconds?
NO YES
If you have any problems programming HomeLink, see the owner's manual included
with the device you are trying to program, call HomeLink at (800) 355-3515, or
visit www.homelink.com.
(if equipped)
®
3
Press and hold the programmed
HomeLink button for about a
second.
Does the device (garage door opener) work?
NO YES
4
Training
Press and hold
complete
the HomeLink
button again.
HomeLink indicator HomeLink LED
flashes for 2 seconds,
remains on.
then remains on.
a
The remote has a rolling code.
Press the "learn" button on the
remote-controlled device (e.g.,
garage door opener).
b
Within 30 seconds, press and hold
the programmed HomeLink button
for 2 seconds.
5
Press the programmed HomeLink
button again; the remote-controlled
device should operate.
39