Software Installation - Optek Music Systems Fretlight Owner's Manual

Software Installation

PC Installation:
Step 1 Insert the Fretlight software installation disk into your computer.
menu screen will pop up with various menu options including a
link to an audio message by Rusty Shaffer, Inventor of the Fretlight.
This message gives you a good overview of how to proceed to install
and enjoy your new Fretlight guitar. Follow the onscreen steps 1-3.
Step 2 Connect the Fretlight-to-USB cable to your guitar and your computer.
NOTE: The ¼" female jack located on the USB end of your cable is for
connection to the optional Fretlight dual footswitch.
Step 3 Launch the Fretlight Studio software on your desktop by double-
clicking the Fretlight Studio icon (which is probably on your desktop).
Mac Installation:
Step 1 Insert the included Fretlight software disk into your computer. Browse
the disk and install Mac designated programs.
Step 2 Connect the Fretlight-to-USB cable to your guitar and your computer.
NOTE: The ¼" female jack located on the USB end of your cable is for
connection to the optional Fretlight dual footswitch.
Step 3 Launch any of the Fretlight software programs on your computer and
start jamming.
4