Viper SmartStart VSM50BT Quick Reference User Manual

Congratulations on the purchase of your state-of-the-art Viper SmartStart BT system. Reading this user's guide
prior to using your system will get you off to a quick and smooth start.
Start Here
Before you can start using your system, the following steps must be performed:
1. Download the free Viper SmartStart app from iTunes App Store or Android Market, depending on the
type of smartphone you own.
2. Have the VSM50BT system installed by your authorized Viper dealer. Your installer can also provide
you with information about your system.
3. Follow the steps below to finish connecting your smartphone to your installed VSM50BT module.
Note 1: Your VSM50BT may be used as a standalone unit or connected to an existing Viper system. As a result functionality/
screen appearance may differ slightly across systems.
Set up your app to connect with VSM50BT
More Screen Settings-Mode 1&2
1. [All phones] Place your VSM50BT system in dis-
covery mode by holding down the pairing button
on the module until the LED turns blue (pairing
button is the one furthest away from the LED)
2. [iPhone only, Android skip to step 3] Open your
phone's Bluetooth menu, make sure Bluetooth is
turned on. Look for your VSM50BT device name
on the list of available Bluetooth devices (Smart-
StartBT-xxxx). Tap on the device name to pair
your phone to it. The blue LED on your VSM50BT
module begins flashing quickly when it connects
to your phone at the end of the pairing process,
then turns solid blue to indicate successful con-
nection.
3. [All phones] Open your SmartStart app, then
go to More/Settings and turn on the Bluetooth
switch at the bottom of that page.
4. [iPhone only, Android skip to step 5] The app
automatically navigates to the Cars tab so you
can program your VSM50BT system to the app.
There are two ways to do this, depending on
whether you have the VSM50BT as a standalone
system (mode 1) or added to an existing full Vi-
QRGVSM50BT 2012-02
BT
BT
Cars Screen-Demo Cars Screen-Detail
per SmartStart system (mode 2). Follow the ap-
propriate directions below:
a. Mode 1 (VSM50BT-only): On the Cars tab,
tap the "Add a SmartStart BT system" button.
The app pops up the name of your connected
device (SmartStartBT-xxxx). Select the device
you want to add to the app, then use the edit-
ing functions to add your vehicle name and a
picture. If you have more than one VSM50BT
system to add to the app, repeat these steps
for each system that appears on the device
list.
b. Mode 2 (VSM50BT added to full Viper Smart-
Start system): Log in to your Viper SmartStart
account at More/Settings/SmartStart Login
page. After you are logged in, go to the Cars
tab and personalize your vehicle list with
names and pictures. Then select the Cars de-
tail page and use the "Add SmartStart BT"
to associate your VSM50BT system with the
vehicle it is installed in.
5. [Android] Turning on the Bluetooth switch pops
up a list of available VSM50BT systems to add

Quick Reference

User's Guide
VSM50BT
Cars Screen-Active