Shooting A Clear Image Without Camera Shake; Camera Shake Warning Indicator; Using The Steadyshot Function - Sony Alpha 7s Instruction Manual

Shooting a clear image without camera
shake
"Camera shake" refers to unwanted movement of the camera that occurs
after the shutter button has been pressed, resulting in a blurred image.
To reduce camera shake follow the instructions below.

Camera shake warning indicator

In situations where the camera may be
subject to camera-shake, the
(Camera shake warning) indicator
flashes. In this case, use a tripod or the
flash.
Notes
• The camera shake warning indicator does not appear in the following situations:
– The exposure mode is set to M/S, or during movie recording.
– When the viewing mode is set to [No Disp. Info.], [Level], or [Histogram].

Using the SteadyShot function

When a lens equipped with the camera shake compensation function is
used, the SteadyShot function is available for this camera to reduce camera
shake.
MENU button t
Select the desired setting.
Notes
• The SteadyShot function may not work optimally when the power has just been
turned on, right after you point the camera towards a subject, or when the shutter
button has been pressed all the way down without stopping halfway.
• When using a tripod, deactivate the SteadyShot function because there is a potential
for malfunction of the SteadyShot function.
GB
58
(Camera Settings) 7 t [SteadyShot] t
(Camera shake warning)
indicator