Advertisement
Assembly
1. Attach the positive battery clamp to the positive battery terminal and the negative battery
clamp to the negative battery terminal.
2. Expose the solar panel to sunlight.
Tilt Mounting
On the back of the solar panel observe the metal brackets embedded in the frame of the solar panel for
1. Insert the threaded side of each mounting pole into the bolts on the backside of the solar panel.
2. Then secure the solar panel on a flat surface directed toward the sun.
Flat Mounting (Required tool 1/8")
On the back of the solar panel observe the metal brackets embedded in the frame of the solar
1. Remove one headless screw from the bracket with a 1/8" flat head screwdriver.
2. Align the Mounting bracket to the hole at an angle so the other headless screw is visible, insert
the first screw in the Mounting bracket.
3. Remove the second headless screw and rotate the bracket so that the second screw fits in the
hole, insert a second screw.
4. Repeat above steps with remaining brackets and screws.
5. Turn solar panel over and lay across a flat surface. Insert screws into bracket and secure to
mounting surface
6. We suggest keeping a ½" space between the solar panel and the mounting surface for proper
ventilation.
Note: The longer mounting screws included are for wood and other pliable surfaces. To mount on brick
or other surface please purchase appropriate screws at your local hardware store.
Operation
The solar panel will produce a current when exposed to sunlight. Direct sunlight will produce best
results. Diffused or low light will result in lower or no output.
Maintenance
It is recommended that the general condition of any 7 Watt Solar Charger be examined before it
is used. Keep your 7 Watt Solar Charger in good repair by keeping it clear of dirt and debris.
You may wipe your 7 Watt Solar Charger with a damp cloth if necessary. Do not use soap or
solvents
Do not pour chemicals on module when cleaning
tilt mounting option
panel for flat mounting option
Page of 5
4
Advertisement
