Lenovo ThinkCentre 6417 Hardware Maintenance Manual page 97

7. To install the new hard disk drive into the plastic bracket 1 , flex the bracket
and align the pins on the bracket with the holes in the hard disk drive. Do not
touch the circuit board 2 on the bottom of the hard disk drive.
8. Connect the signal and power cables to the rear of the new hard disk drive.
9. Slide the new hard disk drive into the drive bay until it snaps into position.
10. Reconnect the power cable to the optical drive.
11. Go to "Completing the FRU replacement" on page 103.
Chapter 8. Replacing FRUs
91