Emergency Beep; Message Recipient - Iridium Extreme Quick Manual

Emergency Actions
Message and Call
Message Only
Call Only
Select

Emergency Beep

Emergency Beep
Enabled
Disabled
Select

Message Recipient

In the Emergency Options menu, Message Recipient will allow you
to program up to three (3) contacts that will receive Emergency Mode
notifications via messaging. In order for this feature to operate, "Message
and Call" or "Message Only" needs to be selected in Emergency Actions.
The default setting for Message Recipient is "empty", meaning that
recipients need to be added in order to notify a designated contact in the
event of an emergency.
To change the default setting to either
Message Only or Call Only, use the
2-way Navi-key, highlight the preferred
option and press the left option key,
labeled Select.
Back
Note: If the GPS Settings Lock is
enabled, you will be prompted for
the GPS Settings Lock PIN when
attempting to change this setting.
In the Emergency Options menu,
if Emergency Beep is enabled, the
handset will beep three (3) times every
five (5) minutes to enable responders to
hear where the handset is located. The
default setting is Disabled. To change
Back
the default setting to Enabled, use the
2-way Navi-key to highlight Enabled
and press the left option key, labeled
Select.
Note: If the GPS Settings Lock is
enabled, you will be prompted for
the GPS Settings Lock PIN when
attempting to change this setting.
Iridium Extreme™ User Manual 169