INSTALLATION INSTRUCTIONS USER INSTRUCTIONS COOKER MODEL BAF91EG BAF92EG 90X60 cm...
Page 2
We also carry a complete range of spare parts for all Think products. For all your spare parts enquiries please contact our team at Pronto Parts on: 1300 306 973 Again, thank you for choosing an appliance brought to you by Think Appliances and we look forward to being of service to you. Kind regards...
Page 3
Important information Introducing your new cooker We thank you and congratulate you on your choice. These instructions cover four cooker models: These carefully designed products, manufactured with the highest quality materials, have been corefully tested to satisfy all your cooking demands. We therefore request that you read and follow these easy instructions which will allow you to obtain excellent results right from the start.
Page 4
Before connecting your new cooker Before using your new cooker, please read these 'Instructions for Use' carefully. They contain important information concerning your personal safety as well as on use and care of the oven. Please keep the operating and installation instructions in a safe place; this important documentation may also be of use to a possible subsequent owner.
Page 5
Electrical supply All three models require connection to a 15 Amp wall socket Instructions 1. The model number and the type of appliance, gas pressure and gas type ore found on A copy of the data plates is reproduced the inside of the oven door, centre bottom. on the last page of this booklet.
Page 6
Height over hob: 910 mm Height over upstand: 980 mm Width: 895mm & handle Depth: (incl. oven door knobs): 660mm Depth: (flush with oven door): 610mm Gas and electric connection connection Electrical The electric lead and plug are for connection onto a 15 Amp socket. A 15 Amp socket is to be within 1 m of the appliance.The lead is situated at the left hand side of the cooker.
Page 7
Gas connection The cooker must be connected to the gas supply with upstream connection of an isolation valve in accordance with the respectively valid requlations. We recommend that the isolation valve be fitted prior to the cooker to enable isolation of the cooker from the gas supply.
Test the operation of the cooker before leaving Note: These burners have no aeration adjustment Check correct operation of the ignitions system and operation of burners individually and in combination. Burner flames should be clear blue, with no yellow tipping. If the burners show any abnormality check that the burners are correctly located.
Page 9
If the legs are not used and the cooker is mounted onto a plinth, fit transit legs to allow for clearance. Once legs are adjusted to a nominai cooker height of 91 Omm, fit the antitilt restraint bracket. 1. Fit flat strap to rear of cooker at the centre point on lower edge using supplied screw 2.
fastener. 5. Locate the cooker into correct and final position. Then from the underside front, secure into position with self tapping screw provided. WARNING - IN ORDER TO PREVENT ACCIDENTAL TIPPING OF THE APPLIANCE, FOR EXAMPLE BY A CHILD CLIMBING ONTO THE OVEN DOOR, THE STABILISING MEANS MUST BE INSTALLED. REFER TO THE INSTRUCTIONS FOR INSTALLATION Upstand installation All stainless steel hob models are fitted with an upstand.
Page 11
4. Remove the remaining protective film from the upstand and secure end caps using M4 CSK screws, one each end. Hob & control panel lay-out BAF91EG / BAF92EG 1. Electronic clock 2. Timer button 3. Duration of cooking button 4. End of cooking button 5.
Cooktop burner operation For cookers fitted with the optional glass lid the glass lid must always be in the open position when the cooktop burners are operating. First time use Thoroughly clean cooktop with warm soapy water prior to first use. Cooktop burner operation The individual burner position on the cooktop is indicated by a graphic placed above the burner control knob.
Page 13
(e.g. a range hood of overhead exhaust fan) Electronic clock (model BAF91EG / BAF92EG) To program the cooker press the desired function button and adjust the required time using the + and - buttons...
Page 14
Oven will not switch on/to clear a program If the oven will not switch on and the 'A' symbol is illuminated on the display, a program is stili running. To clear a program press the and the symbols simultaneously. The 'A' symbol will switch off and the only will be illuminated.
Page 15
1. Press the symbol and using the + and - buttons adjust the ti me you wish the cooking to stop 2. Turn the function selector control knob to the required mode. 3. Then turn thermostat control knob to the desired temperature. NOTE: the 'A' and the symbol should be illuminated.
Page 16
Operate the oven for about 30 minutes at 200°C on fan forced or fan assisted in order to eliminate any odours from all oven elements. Oven /grill use for models BAF91EG & BAF92EG Thermostat and function selector control knobs...
Page 17
Switching the oven ON 1. Turn the function selector control to the required cooking mode. The orange 'power on' thermostat indicator light illuminates. 2. Set the temperature control to the required cooking temperature. The selected temperature will be maintained automatically. The orange thermostat indicator light illuminates when the oven is first turned on, and extinguishes when the required temperature is reached.
Page 18
Conventional cooking Thermostat setting from 50°C – 250°C. Moderate oven 180°C. This mode uses upper and lower heating elements to cook. Cooking is possible on one shelf position only and food should be placed towards the centre of the oven on shelf position 3.
Fan forced cooking Thermostat setting from 50°C - 250°C. Moderate oven 170°C. In this mode the rear circular heating element provides heat whilst the fan distributes the heat evenly throughout the oven interior. It is possible to cook several dishes simultaneously on different shelves and food can be placed on any shelf position.
Trouble shooting guide Problem Possible cause Action Burners don’t light Power to appliance turned off Turn on power supply Cooktop burner difficult to light Dry and reposition cap Burner damp incorrectly positioned Spark ignitor clogged with grease Clean ignitor Clean ports Burner ports blocked Spark igniter does not function Phone service number for service or...
Page 21
Cleaning Cleaning hob Once the appliance is cold, clean it with a sponge and soapy water. Remove any spills immediately. This will avoid unnecessary effort later Allow burners and trivets to cool down before cleaning them. The burners and trivets must be cleaned regularly to keep them in good condition. This is done by submerging them in soapy water and scrubbing them with a non-metal brush to keep the ports and slots free from obstructions so they give a perfect flame.
Page 22
Cleaning oven glass door The oven door may be removed for cleaning. To remove the oven door follow the steps below: 1. Open the door fully 2. Lift the two levers forward as shown in figure below left 3. Close the door as far as the first stop (created by the raised levers). 4.
Service information Service and maintenance must only be carried out by an authorised person This appliance shall not be modified. Always disconnect the gas supply and power before servicing the cooker. After service always check connections for gas soundness at connections with soapy water.
Page 24
Wiring diagrams model GEF91EG GEF92EG A copy of those diagrams is situated on the back panel of the cooker.
Page 25
Data plates The data plates reproduced below cover all three cookers. You will find your particular model number on the data plate attached to the inside of the oven door, centre bottom. Always quote your model number when requesting a service calI. note: Refer to cover page for duplicate data label applicable to your appliance.
Need help?
Do you have a question about the BAF91EG and is the answer not in the manual?
Questions and answers