Table of Contents
Summary of Contents for ED Nord EXCELAM-Q 1670RS
- Page 1 USER’S GUIDE EXCELAM-Q 1100RS/1670RS LEADERS IN LAMINATION TECHNOLOGY www.gmp.com Before operating the unit, please read this manual thoroughly and retain it for future reference. EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500...
- Page 2 WARNING “Important Safety Instruction” is for the purpose of user’s safety and prevention of Property loss. Read thoroughly and use rightly according to the manual. Important Safety Instruction is classified as “Warning” and “Caution”, the meaning is as follows. Do not connect or disconnect with wet hands, as this will cause an electric shock. This symbol means that you could suffer personal injury and damage the machine.
- Page 3 CAUTION Dieses Sicherheits-Zeichen markiert einen wichtigen Sicherheitshinweis in diesem Bedienungshandbuch und auch an dem Gerät. When moving the product, turn off the power switch, disconnect the power plug from the socket. Lesen und beachten Sie diese Hinweise und die entsprechenden Anweisungen sorgfällig. When lamintor is not in use, you must turn off the power switch, disconnect the power plug from the Es gibt zwei wichitige Sicherheitshinweise und sie meinen unter Folgende.
- Page 4 VORSICHT Warnung Wenn Sie das Gerät in eine neue Position bewegen, ziehen Sie den Stecker aus der Steckdose und halten Sie das Stromkabel bei sich.Wenn Stecker und Stromkabel beshadigt werden, gibt es das Risiko Vermeiden Sie die Stecker mit flußiges Hand im Kontakt. eines elecktrischen Shlages und bricht ein Brand aus.
- Page 5 Contents Part name Carriage & Installation Control panel Usage of the main device Laminating procedure Laminating guide SURELAMPLUS-PCR800DBS Product Maintenance Trouble shooting Specification GMP Subsidiaries 2.5mm T Wrench 1EA 3mm, 4mm L Wrench 1EA Fuse 5A 2EA User Guide EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500...
- Page 6 Pull Roller Front Panel Pressure Plate Rewinder Rewinder Pressurel handle Safety Cover Upper Sub-roller Clutch Pressure Handle Rewinder Heat Roller Upper Film Back Trimmer Bottom Film Stretch Bar Film Cutter Safety Cover Pull Roller Film Core Bottom Sub-Roller Stand Pressure Plate Emergency Switch Moving Wheels Upper Film...
- Page 7 This product is easy to carry mainly due to the caster attached Upper Heating roller temperature At carrying product, push the “locker of a caster” toward “OFF” direction and the caster moves. indication panel The product is too heavy, necessarily more than 2 persons should carry the product. On the condition of loading and Shows the setting temperature of Heating carrying the product, necessarily use the lift-truck.
- Page 8 RUN Button Is for the purpose of roller rotation. Temperature Setting Button Is for the purpose of setting heated roller's temperature. The setting temperature range is Stop Button “0 ~130 ”. When you press the temperature setting button, the value on the display Is for the purpose of stopping a roller's rotation.
- Page 9 Rewinder tension handle Is for the tension control of rewinder. On the way of using it, if the tension is loose or too strong, adjust it. Power Switch Tension increases when turning the handle right, otherwise turn left, it decreases. Is for supplying or interrupting the power of machine, circuit breaker installed, when the overloading or overflow of electricity happens, automatically shuts off the power when pressing the switch “I”, the power is on, otherwise pressing “O”,...
- Page 10 Stage 2 : Laminating Readiness Stage 1 : Film Installation 4. Reitherate sequence 1~3, 1. The edge of upper film should be 2. The inserted paper between rollers, 3. Bottom film should be sticked to ready for another set. positioned at the upper roller. should be sticked to upper film.
- Page 11 Do not laminate with following things Film Loading Metal plate, Timber board, Credit card Things to be tarnished Combustible things Clothes Rewinder easily by heat Upper Film Upper Sub-Roller Using a separator, separate the laminated Film After laminating paper printed by heat transfer printer, as time goes by, the paper may and paper.
- Page 12 Stage 4 Laminating Is the same as the hot laminating stage 3 Stage 1 : Film Installation the same case as like the hot laminating stage 1.(Film installation) In the case of film width is above 1M or 25KG, More than 2persons is needed. If you does not, you can suffer a personal injury.
- Page 13 Max. Setting If you does not cleanse the roller... Film Thickness Paper Type Temp. - Film can be wound with rollers. Speed Below 38mic(1.5mil) - Laminating results have a stain. 50~80mic(2~3.5mil) * To prevent this status, roller cleansing is needed. Below 100g 100~150mic(4~6mil) 175~250mic7~10mil)
- Page 14 Symptom Trouble shooting Model Name EXCELAM-Q 1100RS EXCELAM-Q 1670RS Power supply problem Check circuit breaker and disconnection of fuse. Contact dealer / engineer. 220~240V, 50/60Hz Power Requirements Rollers not turning Check whether the front safety lever is fixed into fixing hole inside...
- Page 15 Total Laminating & Graphic Systems Manufacturer http://www.gmp.com President & CEO Y P Kim #472, Munbal-Ri Kyoha-Eup, Paju-Si, Kyoungki-Do, Korea Trade Dept Tel No : +82-31-943-3600 Fax No : +82-31-943-4433 e-mail : export@gmp.com GMP EUDC GmbH Europe Distribution and Marketing Center Managing Director S G Ra Sales &...