Table of Contents
Advertisement
6. Effect Send (EFX. Send)
Press the PAGE UP button to pass to the Efx. Send function.
This function works in exactly the same way as Reverb Send. The EFX.
Send function can be used to control the amount of Effect applied to the
sections of the current Preset.
For example, the single Preset GrandPiano recalls an Effect Send of 64,
the Layer section 100 and the Split section 0.
Note: the following examples can be heard on your instrument only if the
Effect button is selected (LED on).
The status of the Efx. Send setting is shown as follows:
To apply more or less EFX. Send to the current sound, press the DATA
+ or – buttons.
Press the LAYER button (LED on) followed by PAGE Up to activate the
Layer screen (identified by the letter "L").
Press the SPLIT button (LED on) followed by PAGE Up to activate the
Split screen (identified by the letter "S").
NOTE: When you pass directly from Layer to Split situations (or vice-
versa), there is no need to press the Page Up button to see the relative
display.
Holding down the DATA + or – button increases or decreases the EFX.
Send value rapidly and stops instantly after release.
A maximum value of 127 or a minimum value of 0 can be obtained. The
"0" setting corresponds to no Effect.
6 EFX. SEND
'''''
64
6L EFX. SEND
'''''''''
100
6S EFX. SEND
0
31
Hide quick links:
Advertisement
Table of Contents
