Advertisement
Using your pizza maker
1. Before First Use
Remove all packing material.
Take everything out of the pizza maker.
Be sure to keep the unit unplugged.
Clean the pizza pan with warm soapy water.
Wipe the inner walls of the pizza maker with a damp cloth or sponge.
Do not immerse the unit in water.
2. Cooking
Cooker more than just pizza with your pizza maker. Use as a portable oven
for appetizers, grilled sandwiches and much more.
Note: You do not need to preheat the appliance
Place the pizza maker on a flat heat resistant surface..
Be sure that the temperature controller is on the position of "off".
Lightly coat the pizza pan with cooking spray, especially when making a pizza
crust from scratch.
If using a pre-packaged pizza, be sure to remove all pizza packing before cooking,
including the cardboard disc. Do not place foil or any other coverings on the pizza
while cooking. This could cause a fire.
Center your pizza on the pizza pan or make your pizza directly on the pizza pan.
Open the lid. Place the pizza pan over the center of the drive shaft.
Close the lid and plug the appliance, the power pilot light is on and the motor of
the turnplate is working. Speed of the turnplate is 2.5 or 3 revolutions per minute
At the moment, the heating pilot light is off for the heating element is not working.
Adjustable thermostat allow you to select the perfect cooking temperature with
three options:, probable temperature for the three steps is as below:
Advertisement
