Using The Lcd Display; Setting The Timing Mode; Adjusting The Screen Image - ViewSonic VA702mb User Manual

Using the LCD Display

Setting the Timing Mode

Setting the timing mode is important for maximizing the quality of the screen image and
minimizing eye strain. The timing mode consists of the resolution (example 1024 x 768) and
refresh rate (or vertical frequency; example 60 Hz). After setting the timing mode, use the
OSD (On-screen Display) controls to adjust the screen image.
For the best picture quality set your LCD display timing mode to:
VESA 1024 x 768 @ 60Hz.
To set the Timing Mode:
1. Set the resolution: Right-click on the Windows desktop > Properties > Settings > set the
resolution.
2. Set the refresh rate: See your graphic card's user guide for instructions.
WARNING: Do not set the graphics card in your computer to exceed the maximum refresh
rate of 85Hz; doing so may result in permanent damage to your LCD display.

Adjusting the Screen Image

Use the buttons on the front control panel to display and adjust the OSD controls which display
on the screen. The OSD controls are explained at the top of the next page and are defined in
"Main Menu Controls" on page 9.
1. Auto Config / Exit
2. Volume -
3. Volume +
ViewSonic VA702mb
External Control Button
EXTERNAL CONTROLS
4. MENU / ENTER
5. Power Button/ Power Indicator
6