Pfaff Creative 1467A Instruction Book page 105

Binding edges with
non-wov en tape
prog
--
(J
00
--
3—5 0
Fold ready-made bias binding lengthwise
shape-press. Push the folded binding over
fabric edge and baste it in place, if required. TI
sew it on with straight stitches (Fig. 1).
Edge-bin ding with
the binder
Program: 10
Stitch-width:
2.5 mm
Stitch length: 1,5 mm, (Fig. b)
Remove sewing toot and screw on binder. Ins
the bias tape in the scroll of the binder and pu
out to the rear. Set the binder in such a way ft.
the needle enters 1 to 1.5 mm from the turned
bias edge. Sew a number of stitches along t
bias tape. Place the raw edge in the groove of t
binder. During sewing, the bias tape is wrapp
automatically over the material edges. Sew if.
bias tape on with the above mentioned progra
or a program of your own selection. Straight mat
rial edges are the simplest to bind (Fig. 2).
Sewing foot:
Program:
Stitch length:
Binder (special accessory)
00
2.5 mm, (Fig. a)
or
2
96