Time And Date - D-Link DIR-457 User Manual

Section 5 - WEB Configuration
The Time Configuration option allows you to configure, update, and maintain the correct time on the internal system clock. From this
section you can set the time zone that you are in and set the Time Server. Daylight Saving can also be configured to automatically adjust
the time when needed.
Time Zone: Select the Time Zone from the drop-down
menu.
Enable Daylight Check the box to enable Daylight Saving
Saving: time.
Sync your Click this button to set the device's time
Computer's Time the same to local PC.
Settings:
Automatic Check the box to enable the device to

Time and Date

automatically synchronize with a D-Link
Configuration: NTP Server. NTP stands for Network Time
Protocol. NTP synchronizes computer
clock times in a network of computers.
This will only connect to a server on the
Internet, not a local server.
NTP Server Used: Select one of the D-Link NTP Servers
from the drop-down menu. The DIR-457
will then synchronize it's clock to be the
same time as the D-Link Internet time
server. Click the Update Now button to
synchronize with the D-Link Internet time
server immediately.
Set the Time and To manually input the time, use the drop-
Date Manually: down menus to enter the values in these
fields for the Year, Month, Day, Hour,
Minute, and Second.
D-Link DIR-457 User Manual
Time and Date
Click the Save Settings button at the top or bottom of the window to save
the Time and Date settings.
66