Safety Instructions; Using Your Air Purifier - Hunter PermaLife 30706 Owner's Manual

SAFETY INSTRUCTIONS

Save These Important Instructions
1. This Air Purifier is designed for use on
a flat, level surface and may not work
properly on an uneven surface. ALWAYS
place this Air Purifier on a firm, level
surface. ALWAYS place the Air Purifier at
least six (6) inches away from walls and
three (3) Ft. from heat sources such as
stoves, radiators, or heaters.
2. Place the Air Purifier in an area that is out
of the reach of children.
3. Before using the Air Purifier, extend the
cord and inspect for any signs of damage.
DO NOT use the product if the cord has
been damaged.
4. To reduce the risk of electric shock, this
product has a polarized plug (one blade is
wider than the other) as a safety feature.
This plug will fit into a polarized outlet only
one way. If the plug does not fit fully into
the outlet, reverse the plug. If it still does
not fit, contact a qualified electrician. DO
NOT attempt to defeat or override this
safety feature.
5. ALWAYS UNPLUG the Air Purifier when it
is not in operation, while the filter is being
changed, and while it is being cleaned.
6. DO NOT tilt or move the Air Purifier while it
is in operation. Shut off and unplug before
moving.
7. DO NOT immerse the Air Purifier in water
as permanent damage will occur. Refer to
and follow the CLEANING AND FILTER
REPLACEMENT instructions.
8. DO NOT run the ionizer if tobacco smoke,
air fresheners, dripless wax candles, or
grease from cooking is present.
©2011 Hunter Fan Co.

USING YOUR AIR PURIFIER

1. Take the air purifier out of the box and
remove the clear plastic protective bag and
place the unit on a firm level surface.
2. Before turning on the air purifier, you
need to confirm that the filters are firmly in
place and have not become loose during
shipping. To check the filters, open the front
grill by turning the grill knob until the notch
above the Hunter logo aligns with the
unlock symbol on the grill. Figure 1.
3. Open the door outward until the latches
holding the front grill easily slide away from
the arms holding them. Figure 2.
4. The carbon pre-filter is mounted inside the
front of the unit with hook tape. Confirm
that it properly covers the grill vents. You
may notice a few black particles coming off
the pre-filter. Those particles are part of the
odor-removing activated carbon and will be
collected on the filter during use.
5. The PERMAlife
the unit. If present, remove the plastic bag
3
Figure 1.
Figure 2.
filter will be resting inside
®
43064-01 20111021