Nikon D5100 User Manual page 349

Installing ViewNX 2
Install the supplied software to display and edit photographs and movies that have been copied to your computer. Before installing
ViewNX 2, confirm that your computer meets the system requirements listed below.
o
Copy pictures to the computer.
f)
View pictures.
I
_1-
-
.
~
.
.
-
.
..... , .
,-:-
...
'
...
"
©
2011 Nikon Corporation
GlJ
Starting ViewNX 2 Manually
, Windows: Double-click the ViewNX 2 shortcut on the desktop.
, Mac
as:
Click the ViewNX 2 icon in the Dock.
A dialog will be displayed, allowing you to print pictures on
a printer connected to the computer.
Printing Pictures
Click the Print button in the ViewNX 2 tool bar.
You can crop pictures and perform such tasks as adjusting
sharpness and tone levels.
You can perform such tasks as trimming unwanted footage
from movies shot with the camera.
Retouching Photographs
Click the Edit button in the ViewNX 2 tool bar.
Editing Movies
Click the Movie Editor button in the ViewNX 2 toolbar.
1
Start ViewNX 2.
Pictures are displayed in ViewNX 2 when transfer is
complete.
GlJ
For More Information
Consult online help for more information on using ViewNX 2.
(;;:,;,~..:::-::-~ )
2
Double-click Import File.
[l]
Windows 7
If the dialog shown at
right is displayed, follow
the steps below to select
Nikon Transfer 2.
1
Select Nikon Transfer 2 for Import pictures and videos.
Under Import pictures and videos, click Change program. A program
selection dialog will be displayed; select Import File using Nikon
Transfer 2 and click OK.
• SD card slot: If your computer is equipped with an SD card
slot, the card can be inserted directly in the slot.
• SD card reader: Connect a card reader (available separately
from third-party suppliers) to the computer and insert
the memory card.
If a message is displayed prompting you to choose a
program, select Nikon Transfer 2.
Device button
4
Terminate the connection.
If the camera is connected to the computer, turn the
camera off and disconnect the USB cable. If you are using
a card reader or card slot, choose the appropriate option
in the computer operating system to eject the removable
disk corresponding to the memory card and then remove
the card from the card reader or card slot.
3
Click Start Transfer.
At default settings, all the pictures on the memory card
will be copied to the computer.
2
Confirm that the correct source is selected,
Confirm that the camera or removable disk appears
as a device button in the "Source" panel of the Nikon
Transfer 2 "Options" area.
1
Choose how pictures
will
be copied to the computer.
Choose one of the following methods:
• Direct USB connection: Turn the camera off and ensure that
the memory card is inserted in the camera. Connect the
camera to the computer using the supplied UC-E6 USB
cable and then turn the camera on.
Click OK
_,'.F.'TII.__
512 MB or more (2 GB or more
recommended)
Resolution: 1024 x 768 pixels (XGA)
or more (1280 xl 024 pixels
(SXGA) or more recommended)
Color: 24-bit color (millions of
colors) or more
Mac
as x
version 10.4.11,
10.5.8, or 10.6.6
• Photos/JPEG movies: PowerPC
G4 (1 GHz or better), GS,
Intel Core, or Xeon series
, H.264 movies (playback):
PowerPC G5 Dual or
Core Duo, 2 GHz or better
, H.264 movies (editing): 2.6 GHz
or better Core 2 Duo
Pre-installed versions of Windows 7
Home 8asic/Home Premium/
Professional/Enterprise/Ultimate,
Windows Vista Home Basic/Home
Premium/Business/Enterprise/
Ultimate (Service Pack 2), or
Windows XP Home Edition/
Professional (Service Pack 3). All
installed programs run as 32-bit
applications in 64-bit editions of
Windows 7 and Windows Vista.
, Windows 7IWindows Vista:
1 GB or more (2 GB or more
recommended)
, Windows XP: 512 MB or more
(2 GB or more recommended)
, Photos/JPEG movies: Intel Celeron,
Pentium 4, or Core series,
1.6 GHz or better
, H.264 movies (playback): 3.0 GHz or
better Pentium D
, H.264 movies (editing): 2.6 GHz or
better Core 2 Duo
os
CPU
RAM
I
"""""'" -..£1 1 - :::::::::-;:.';,--.
.,~.
.
&"~_'_'''''.~'.'''_'
-.,.u.-
,X2
([2] .. -
'--""'.~
--~!...-..-
Resolution: 1024x768 pixels (XGA)
or more (1280 x 1024 pixels
Monitor
I
(SXGA) or more recommended)
Color: 24-bit color (True Color) or
more
Hard-disk IA minimum of 500 MB available on the startup disk (1 GB or more
space recommended)
[l]
System Requirements
Click
Yes.
The following software is installed:
• ViewNX 2
• Apple QuickTime (Windows only)
5
Remove the installer CD from the CD-ROM drive.
4
Exit the installer.
~
J
N,
{}
Double-click
Welcome icon
Double-click
icon on desktop
~
~~~)
~~
~~
CD
Select region
I
(if
required)
J._
~
e
p::::- • •' : : . .
::.~ ~- -'~
l-----+@Seleetlanguag
---(i]Wo!-!
@ClickNext
_ ...... ...-;1
VlewNX2-'
(~0- Click
Install
r
[l] Installation Guide
For help installing ViewNX 2, click Installation Guide in Step
3.
2
Select a language.
If the desired language is not available, click Region
Selection to choose a different region and then choose
the desired language (the Region Selection button is not
available in the European release).
3
Start the installer.
Click Install and follow the on-screen instructions.
1
Start the computer and insert the installer CD.
.~i@jr.iI.i.
Mltm';-