Service Searching; Dvb-S2 Tuner Configuration; Single Satellite - Direct Connection - Dreambox DM500 HD Instruction Manual

11. Service searching

11.1 DVB-S2 Tuner configuration

If no OSD menu is visible on your screen, press the Menu-Button to open the main OSD menu. Navigate to
the option "Setup" and press the OK-Button to select.
1. Navigate to the option "Service searching" and press the OK-Button.
• The "Service searching" menu will open up.
2. Navigate to the option "Tuner configuration" and press the OK-Button.
• The "Choose tuner" menu will open up.
3. Use the Navigation-Buttons up and down to select the DVB-S2 tuner and press the OK-Button.
11.1.1 Single satellite – direct connection
Use this type of configuration if you want to receive a single satellite with a Single Universal LNB. The coax
cable is directly connected from you Dreambox to the LNB. Please read the section 11.1 DVB-S2 configurati-
on to learn how to get into this menu.
-53-
The "Reception settings" menu will open up.
Use the up/down-Buttons to navigate to the "Mode" option and use
the left/right-Buttons to select "Single".
Navigate to the option "Satellite".
Use to the Navigation-Buttons left and right to select the desired
satellite and press the OK-Button .
You are taken back to the "Choose tuner" menu.
If you have trouble with "Tune failed" messages please set the
"Send DiSEqC only on sattelite change" to "yes".