Marantz NR1605 Owner's Manual page 171

Contents Connections
TV Format
Set the video signal format to be output for the TV you are using.
o Format
NTSC
(Default):
PAL:
"Format" can also be set by the following procedure. However, the menu screen
is not displayed. Following the display content to make the setting.
1. Press and hold the main unit's ZONE2 SOURCE and STATUS for at least 3
seconds.
"V.Format:<NTSC>" appears on the display.
2. Use the main unit's ZONE2 SOURCE or INTERNET RADIO and set the video
signal format.
3. Press the main unit's STATUS to complete the setting.
NOTE
When a format other than the video format of the connected TV is set, the picture
will not be displayed properly.
Front panel Display
Playback
Select NTSC output.
Select PAL output.
Rear panel
Settings
171 Remote
Tips Appendix
Index