Advertisement

Important recommendations

Before using the new coffeemaker for the first time, we recommend to rinse the inside
elements and ducts. Fill the machine with cold water and operate it once or twice without any
coffee.
Place the machine horizontally in a frost-free room. If the room is not frost-free, remove
remaining water from the machine. Remove all loose parts and hold the machine upside down
over the sink.
Prior to this operation the machine should be disconnected from the mains.
If the machine will not be used for some time, it is recommended to run it once through with
water only before making coffee. This will prevent any stale flavour.
Setting of the filterholder:
for preparing 6-10 cups
for preparing 2-5 cup
if you want coffee before the brewing is completely finished
a) A short power-supply cord is to be provided to reduce risks resulting from becoming
entangled on or tripping over a longer cord.
b) Extension cords may be used if care is exercised in their use.
c) If a extension cord is used,
1)
the marked electrical rating of the extension cord should be at least as great as the
rating of the appliance
2)
If the appliance is of the grounded type, the extension cord should be a grounding-
type 3-wire cord, and
3)
The longer cord should be arranged so that it will not drape over the counter top or
table top where it can be pulled on by children or tripped over.
Servicing should be performed by an authorized service facility.

Descaling

Your coffeemaker will need regular descaling, depending on the hardness of
the water in your area and the frequency with which the coffeemaker is used.
Instructions:
Once the vertical and transparent spyglass in the middle of the reservoir has lost its
transparency because of scale, cleaning should be done.
Should descaling notwithstanding the signal in the spyglass be forgotten there is a second
warning – the red scale indicator, which is located next to the extra hot switch. It will light up
when the equipment needs descaling. If descaling is not carried out regularly, the deposits of
scale will cause overheating of the boiling element and the machine wil l be switched off
automatically.
To descale the machine, proceed as follows:
1.
Fill reservoir with 1 litre of cold vinegar or another good descaler. Place empty filterholder
on the filterbracket and the empty jug on the hot plate. Than switch machine on.
2.
The coffeemaker will determine the descaling speed independently.
3.
After descaling, use the machine twice more with one litre of clean cold water to remove
the vinegar residues in order to prevent a bad flavour in the coffee. If the indicator lamp
is not switched off after descaling, the level of scale may be so high that the procedure
need to be repeated. Do not use a descaling agent more than once.
R
the coffeemaker makers.
MOCCAMASTER
Instructions for use
Coffeemaker KB-741
"Household Use Only"
84198

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Coffeemaker KB-741 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Technivorm Coffeemaker KB-741

  • Page 1 Should descaling notwithstanding the signal in the spyglass be forgotten there is a second Coffeemaker KB-741 warning – the red scale indicator, which is located next to the extra hot switch. It will light up when the equipment needs descaling.
  • Page 2 IMPORTANT SAFEGUARDS Coffeemaker KB 741 When using electrical appliances, basic safety precautions should always be followed, including the following: Coldwatercontainer Lid coldwatercontainer Read all instructions. Do not touch hot surfaces. Use handles or knobs. Outletpipe To protect against fire, electrical shock and injury to persons do not immerse Filterlid cord, plugs, or (state specific part or parts in question) in water or other liquid.

This manual is also suitable for:

Moccamaster kb-741

Table of Contents