Yamaha RX-797 Owner's Manual page 25

• The VOLUME, BASS, TREBLE, BALANCE and
LOUDNESS controls and the CD DIRECT AMP and the PURE
DIRECT buttons have no effect on the source being recorded.
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.
PLA YING AND RECORDING
4
Rotate VOLUME on the front panel (or press
VOLUME
+/-
on the remote control) to adjust
the sound output level of the selected source
to record from.
or
5
Begin recording on the MD recorder, the tape
deck or the VCR connected to this unit.
Front panel
Remote. control
1
Rotate the REC OUT selector on the front
panel to select the source you want to record
from.
~O"a'oRD,"C~OU~'TUN'"
OTVICOL. . ~
evD'
3
1
4
Selecting another source with the INPUT selector on the front
panel (or the corresponding input selector button on the remote
control) while recording is in progress will not affect the
recording.
You can monitor the sound and/or picture being recorded by
rotating the INPUT selector on the front panel (or pressing MD/
TAPE or VCR on the remote control) to select the MD recorder,
the tape deck or the VCR used for recording.
2
Play the selected source to record from.
3
Rotate the INPUT selector on the front panel
to confirm the selected source to record
from.
21
• The VOLUME, BASS, TREBLE, BALANCE and
LOUDNESS controls and the CD DIRECT AMP and the PURE
DIRECT buttons have no effect on the source being recorded.
• Check the copyright laws in your country to record from
records, CDs, radio, etc. Recording copyright-protected
material may infringe on copyright laws.
PLA YING AND RECORDING
4
Rotate VOLUME on the front panel (or press
VOLUME
+/-
on the remote control) to adjust
the sound output level of the selected source
to record from.
or
5
Begin recording on the MD recorder, the tape
deck or the VCR connected to this unit.
Front panel
Remote. control
1
Rotate the REC OUT selector on the front
panel to select the source you want to record
from.
~O"a'oRD,"C~OU~'TUN'"
OTVICOL. . ~
evD'
3
1
4
Selecting another source with the INPUT selector on the front
panel (or the corresponding input selector button on the remote
control) while recording is in progress will not affect the
recording.
You can monitor the sound and/or picture being recorded by
rotating the INPUT selector on the front panel (or pressing MD/
TAPE or VCR on the remote control) to select the MD recorder,
the tape deck or the VCR used for recording.
2
Play the selected source to record from.
3
Rotate the INPUT selector on the front panel
to confirm the selected source to record
from.
21