Page 1
241-9825 1/2” 6.7 AMP HAMMER DRILL Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference.
IMPORTANT SAFETY INSTRUCTIONS WARNING : When using electric tools, machines or equipment, basic safety pre- cautions should always be followed to reduce the risk of fire, electric shock, and personal injury. READ INSTRUCTIONS BEFORE USING THIS TOOL 1. KEEP WORK AREA CLEAN. Cluttered areas can cause injuries. 2.
IMPORTANT SAFETY INSTRUCTIONS 14. DRESS PROPERLY. Don’t wear loose clothing or jewelry; they can be caught in moving parts. Protective, non-electrically conductive gloves, protective eyewear and non-skid footwear are recommended. Wear protective hair covering to contain long hair and keep yourself from harm. 15.
FUNCTIONAL DESCRIPTION 1. Depth gauge rod 2. Depth gauge clamping wing nut 3. Chuck 4. Side handle 5. Chuck key 6. Padded handle 7. Lock-on button 8. Speed control dial 9. Variable speed trigger switch 10. Forward/Reverse switch 11. Drilling and impact mode selector switch OPERATING PROCEDURES This tool is designed for drilling into almost any material.
Page 5
OPERATING PROCEDURES Forward-Reverse To change the chuck rotation direction, move the lever above the trigger to the other side. Setting the direction switch to the right causes the drill to turn clockwise, for normal drilling. The direction switch moved to the left will cause the drill to run in reverse (counterclockwise) direction, backing drill bits and screws out of their holes.
OPERATING PROCEDURES point. Increase the speed as the drill bit bites into the material. 4. When drilling through-holes, place a block of wood behind the workpiece to prevent ragged or splintered edges on the back side of the hole. 5. Do not lock the trigger in the “ON” position if the drill may need to be stopped suddenly.
SCHEMATIC DRAWING WARNING Repairs should be made by an authorized repair center. Do not this power tool . Contact at open or disassemble 1-866-915-8626 for questions regarding this power tool.
Page 9
TOOL SHOP® 1/2” 6.7 AMP HAMMER DRILL WARRANTY 1-YEAR LIMITED WARRANTY: This brand power tool carries a 1-Year Limited Warranty to the TOOL SHOP® original purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this tool with your original sales receipt back to your nearest retail store.
Need help?
Do you have a question about the 241-9825 and is the answer not in the manual?
Questions and answers