BASIC FUNCTIONS
HOW TO ANSWER CALLS
When phone rings or LED blinks, press any key
1
except Volume Up or Down and [
2
To end the call, press [
If you set up the AUTO ANSWER function in
advance, the call will be answered after the
selected number of rings. (Refer to page 33)
CALLER ID FUNCTION
When there is an incoming call, the caller's phone number is
displayed on the screen.
The Caller ID number is saved in the call log.
CALL WAITING FUNCTION
This function notifies you there is an incoming call when you are on
the phone.
l
To answer the call, press [
when you hear the beep.
l
To switch back to the first caller,
press [
] again.
[20]
] key.
].
]
BASIC FUNCTIONS
MISSED CALL DISPLAY
Displays the number of missed calls.
1
l
The message will be cleared when
you press the [
HOW TO ADJUST VOLUME
You can adjust the volume in two ways: by using the volume
control keys on the side of the handset, or by using the menu.
Adjust volume by using the volume control keys
1
during the following operation.
l
During a Call : Earpiece volume adjustment.
l
Standby Status : Ringer volume adjustment.
l
When the Phone Rings : Ringer volume
adjustment.
l
Call status in hands-free : Hands-free volume
shail le nele only. Press [
phone rings and it will mute the ringer.
VIBRATE
This function disables the ringer and vibrates the phone any time an
incoming call is in process. To enable this function press [
and select VIBRATE or by pressing the "up"and "down"keys at the left
upper side of the phone.
MISSED
XX CALLS
] or [
] key.
] when the
], [3],[1]
PREV
[21]