Queensland security OSD High Speed Dome Camera User Manual

Osd high speed dome camera

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

113 Brisbane Rd Mooloolaba QLD 4557

Phone: (07) 5444 5107

Fax: (07) 5414 0512

Website:

www.queenslandsecurity.net.au

Email:admin@queenslandsecurity.net.au

ACN: 136 757 876

ABN: 26 480 252 132

OSD High Speed Dome Camera

User's Manual

● Please read the manual carefully before installing and using the unit. ●

We greatly appreciate your choosing our product!

Table of Contents

Summary of Contents for Queensland security OSD High Speed Dome Camera

Page 1 Fax: (07) 5414 0512 Website: www.queenslandsecurity.net.au Email:admin@queenslandsecurity.net.au ACN: 136 757 876 ABN: 26 480 252 132 OSD High Speed Dome Camera User’s Manual ● Please read the manual carefully before installing and using the unit. ● We greatly appreciate your choosing our product!
Page 2 Important Safeguards 1. During the course of transportation and storage, the product should be avoided from incorrect operations such as heavy pressing, strong vibration, soaking etc, which can cause damage of product. 2. The product is designed for ceiling or wall installation, so it can not be installed up-side- down, and it should be handled properly so as not to bring about mechanical problems affecting the integrative functions of it.
Page 3: Table Of Contents
5.1.1 Setup of the Address of Dome Camera-------------------------------------------------- 7 5.1.2 Setup of the Communication Protocol--------------------------------------------------- 7 5.1.3 Setup of the Baud Rate of Communication---------------------------------------------- 7 5.1.4 RS-485 Bus Matching Resistor ----------------------------------------------------------- 8 5.2 Installation and Connection --------------------------------------------------------------- 8 5.2.1Installation Procedures----------------------------------------------------------------------- 9 5.2.2 Ceiling Installation of the Dome Camera ---------------------------------------------- 9 5.2.3 Wall Installation of the Dome Camera -------------------------------------------------- 11 5.2.4 Alarm Connection and installation--------------------------------------------------------11...
Page 4: Technical Data
The high speed dome camera with various performances can be applied in every walk of life to monitor moving objects in large areas, such as monitoring smart building, bank security, city streets, power departments, airports, bus/railway stations, etc. 2. Technical Data 2.1 Technical Data of High Speed Dome Camera Power supply DC14V(2A) or AC24V(2A)
Page 5 ＞ 50dB Signal output 1.0±0.2Vpp Camera Lens Data (Built-in SONY Integrative Camera) Model SONY18 color / SONY18 color (day and night) Synchronization Internal sync/external sync scan 2： 1interlace resolution > 480 lines brightness 0.7Lux/0.001Lux iris auto/manual focus auto/manual Lens zoom ratio 18×optical zoom Focal length 4.1/73.8mm...
Page 6 4. Description of Functions 1. Trace the Target Users can control pan/tilt to trace the target or change visual angle by keyboard or matrix, and target size on the screen can change by control zoom. With the movement of the camera, the speed dome camera can automatically adjust lens to get clarity picture on the screen when zoom focus and aperture is set to auto mode (default).
Page 7 Left/right positions can be setup through controlling keyboard, and the camera can auto-scan horizontally between the left position and right position, at the preset speed. 7. Camera Lens Control To get desired panoramic view or close shot, the focal length can be adjusted through the controlling keyboard.
Page 8 Aperture Control ● The system has automatic aperture function (default). The aperture can auto-sense the surrounding brightness and make quick adjustment, which stabilizes image brightness. ● To obtain desired image brightness, the aperture can be adjusted manually through the controlling keyboard. Automatic Backlight The camera can automatically backlight on a discretionary basis.
Page 9: Installation And Connection
DIP-1 to DIP-2 of SW2 on the PCB panel is for communication protocol setup. Please refer to the following table: Code Protocol PELCO_D PELCO_P 5.1.2 Setup Baud Rate of Communication DIP-3 to DIP-4 of SW2 on the PCB panel is for Baudrate setup. The default setup is 4800bps. Please refer to the following table: Code Baudrate...
Page 10 · Wall installation Ceiling installation · In-ceiling installation (the camera‟s dimensions are different from the former two) The style of cable（ with Products bracket connector） installation Power supply wall installation Wall bracket cable High video cable Bracket with the Speed 485 cable ceiling installation length of 20 to 40 cm...
Page 11: Wall Installation Of The Dome Camera
Preparation of the Installation 5.2.1 Requirement for the Installation · To avoid mistakes, installation must be done by qualified personnel conforming to related regulations. · Please check whether the attachments are all ready, and whether the installing location and type of installation are compatible. The components of the high speed dome camera include bracket, housings, power supply, decoding panel, dome, temperature controlling devices, etc.
Page 12 Installation of high Speed Dome Camera a. Unpacking the carton and carefully take out the dome camera and its attachments, open the vitreous cover and take out the fillings. b. Loosen the M3 screws connecting the camera and the outer housing, and swivel the camera left for 15 degrees and remove it, then check cable connectors and see if any of them loose and setup the coding switch.
Page 13 Power pinning board 电源压板 Step 1 Put the power device into the connected wall bracket and pin the power device with the power pinning board, then, tighten the screw lest the power device slides out. (See the above figure) Remarks: Please mount the housing-installed wall bracket on the ancillary peg as shown in the figure below, which can save you troubles.
Page 14: Alarm Connection And Installation
DC14V or high speed Black Power AC24V dome-power cable power supply adapter supply Green（ RS485+）、 White（ RS485- high speed dome ） cable controlling -controlling signal device Video Camera Camera- BNC connector Cable signal monitoring device 5-core Alarm input Detector ---- Black(alarm input public port) cable high speed dome...
Page 15 Connection sketch for Alarm input with Usual-closed detector Connection sketch for Alarm input with Usual-open detector...
Page 16 Switching on Power a Make sure the polarity of plugs, sockets and cables connection is correct, then switch on power b The dome camera begins to do the self-check by moving pan 360°, tilt 90° to check the camera lens, the electrical and mechanical structures in pan/tilt state, then executing the restoration program and resuming its original position.
Page 17 C Push the power cable, communication cable and video cable through the bracket tube, leaving long enough cables for connection; D Fix the bracket firmly on the wall with three M5 screw nuts and washers. Cable slot 出线槽或200 400 or 200 Installation of high Speed Dome Camera a.
Page 18 Cable 5-core Alarm input Detector ---- high speed Black(alarm input cable dome public port) Yellow(channel 1 alarm input) Green(channel 2 alarm input) Blue(channel 3 alarm input) White(channel 4 alarm input) 2-core Alarm output High speed dome ---- Brown(alarm output cable alarm horn pulic port) Grey(alarm output...
Page 19: Setup And Preview The Preset Positions
Video - Video + 485 + 485 - Alarm output Power + Alarm input Power - Alarm output Alarm input Socket for heater Image amplified 6. Control high Speed Dome Camera by Keyboard Intelligent control and all of its functions can be realized through the keyboard‟s control of dome camera.
Page 20 The function enables the dome camera to quickly return to the preset position. Enter the number(1～ 128) key for preset position number which you need preview, and LED displays the preset position number. Then, press the “PREVIEW” key. The dome camera will return to the preset position.
Page 21: Setup Tours Data
successful. Then go the second one. Enter the second desired preset position number and press the “PREVIEW” key, and the second preset position is successful. More preset position can be added in the same way. c. After all the preset positions having been added in the tour, enter the number “141” on the keyboard and press the “PREVIEW”...
Page 22 Now press “PAN-A” to add preset positions to the tour and the LED displays “P--”. Enter preset position number(1-128) , then press ”ACK” and the LED displays “S01” which means motor speed to the preset position (dome camera with motor speed value from 1(slow)～ 8(fast) ). Enter motor speed value, then press “ACK”...
Page 23 6. Press “PAN-A” to add the fifth preset position and the LED displays “P - -”, enter preset position number “02”, then press “ACK” and the LED displays “S01”; enter speed“04”, then press “ACK” and the LED displays “005”; enter dwell time “003”, then press “ACK” and the LED displays “P01”...
Page 24: Scan Between Two Points
Starting a external commander can make dome camera move between “A” and “B”. (Enter the speed number(1～ 128), press “auto” key and the pan begin to scan between the two points.) 6.4.1 Scan between Two Points After setting up the two points, enter the scan speed (1-28level). Take speed of 32 level for example.
Page 25 1) The Main Menu will be displayed when press “95 PREVIEW”. Setup with any menu has to be through Main Menu. 2) The Main Menu will be exited when press “IRIS-”. c. Basic operation with the Menu and Keyboard. [IRIS+] It means “Enlarge Iris” when viewing image, it means “Save/Return” when setting up menu [IRIS-] It means “Narrow Iris”...
Page 26 speed], press [FOCUS-], the Title Setup content can be deleted. Attention： 1) There are 5 input mode: ABC input, abc input, number input, pinyin input and Character input. When the cursor is moved to “ ABC input”, press [FOCUS+] to confirm the input mode, then corresponding character is shown.
Page 27 C: Using the same method to choose H, I to the Chinese character optional zone, then at most 6 Chinese characters with the same pinyin “ZHI” will be shown in the Chinese character optional zone. D: Using the joystick to move the cursor to Chinese character optional zone, the cursor is at the first Chinese character position.
Page 28 Edit the title of the speed dome 3. Number input mode: Title：智能高速 A: After the Chinese characters input well, move the cursor 球 upward to “Input Mode Optional Zone” and press [FOCUS+] key to choose “Number input”, now the menu is shown as the Figure 6: Pinyin input：...
Page 29 （ 8） Title Disply Setup 7.1.2 1. Press 95+PREVIEW to enter the mainmenu. Saystem main menu 2. Operate the joystick upward or downward to move the cursor to →1 System [System information setup], press [FOCUS+] to enter next grade information menu.
Page 30 System main memu Pan/Tilt parameter setup 7.1.3 Through the setup of the Pan/Tilt parameter, the movement of the Speed →1 System Dome will be controlled accordingly, which is very important for the control of information the image. setup 1. press 95+PREVIEW to enter the Main Menu. 2 Camera 2.
Page 31 ☆ This setup allow the speed dome has a period of idle time(1- 240Minutes), after which it is to carry out a dictated action. Default setup is 0, which means it will not carry out any action. 8. Leisure time activated function Operate the joystick to move the cursor to [Leisure time activated function] option，...
Page 32 7.2.1 Digital Vari-focus Restriction System main menu 1. Press 95+PREVIEW to enter the Main Menu. 1 System 2. Operate the joystick upward or downward to move the cursor to information setup [Camera Parameter Setup], press [FOCUS+] to enter the lower →2 Camera grade menu: Parameter Setup...
Page 33 Automatically Adjusting( if open) or Manually Adjusting (0-255) 2 kinds of functions, which is subjected to the different camera. 7.2.3 B&W and Color conversion System main menu 1. Press 95+PREVIEW to enter the Main Menu. 1 System 2. Operate the joystick upward or downward to move the cursor to information setup [Camera Parameter Setup], press [FOCUS+] to enter the lower →2 Camera...
Page 34 Camera Parameter Setup 1 Digital Vari- The first group interface as below: focus Restriction 1. Exposure Mode Auto 2. Exposure Paremeter 2 Back Light 3. Dynamic Compensation 4. Frame Accumulation mode ON →3 B&W and The second group interface as below: 5.
Page 35 Expure Auto Brightness Gain Mode hutter 1/50 F1.6 1/100 F2.2 1/150 F3.2 12dB 1/250 F4.4 18dB 1/500 F6.4 24dB 1/1000 F8.8 30dB Exposure 1/2000 parameter 1/4000 1/10000 1/3000 1/1.5 Frame Accumulation 1/12 1/25 Operate the joystick to move the cursor to [Frame Accumulation], press [FOCUS+] to set up, the setting parameter is as the Frame Accumulation option in the above tablet.
Page 36 Advanced Functions Setup System main menu 7.2. 4 For HITACHI camera, the Advanced Functions Setup as below: 1 System 1. Press 95+PREVIEW to enter the Main Menu. information setup 2. Operate the joystick upward or downward to move the cursor to →2 Camera [Camera Parameter Setup], press [FOCUS+] to enter the lower Parameter Setup...
Page 37 Advanced Functions Setup 7. 2. 6 For Sony camera, the Advanced Functions Setup as below: 1. Press 95+PREVIEW to enter the Main Menu. 2. Operate the joystick upward or downward to move the cursor to [Camera Parameter Setup], press [FOCUS+] to enter the lower grade menu: System main menu 1.
Page 38 Advanced function setup 5 White Balance Auto 6 Red Color gain 7 Blue Color gain →8 Camera Initialization Off Parameter Setup matching table: IRIS+:back IRIS-:exit Exposure Auto Shutter Brightness Iris Mode 1/50 F2.0/0 F1.4 1/75 F1.6/0 F1.6 1/100 F1.4/0 F2.0 1/120 F2.4 1/150...
Page 39 Advanced Functions Setup System main menu 7． 2. 7 For Sony camera, the Advanced Functions Setup as below: 1 System 1. Press 95+PREVIEW to enter the Main Menu. information setup 2. Operate the joystick upward or downward to move the cursor to →2 Camera [Camera Parameter Setup], press [FOCUS+] to enter the lower Parameter Setup...
Page 40 Advanced function setup 4. Enter the Second Setup Group Interface.. When entered the [Advanced Functions Setup] menu, operate the joystick upward or 1 Exposure downward to enter the next page menu, the cursor is at the first option Mode Auto [White Balance Mode Auto], press [FOCUS+] to begin to set., the 2 Exposure function options includes Auto, Outdoor, Indoor, Single time lock,...
Page 41 2. Set up 3. Preview Auto Running Setup] 4. Delete 5. Edit Title →1Preset 4. Set up Preset Position Number: Operate the joystick to move the position setup cursor to [Serial Number], press [FOCUS+] to enter Serial Number 2Left/right setup scan Press [FOCUS+] to increase the number, press [FOCUS-] to decrease 3Cruise setup...
Page 42 1、 Press 95+PREVIEW button， enter Main Menu System main menu 2、 Move the cursor to[Auto Running Setup] by operate the joystick 1 System up wards and downwards， press[FOCUS+]button to[Auto Running Setup]‟s next menu。 Move the cursor to[left/right scanning]， press information setup [FOCUS+] button and show the menu as: 2 Camera...
Page 43 7． 3. 3 Cruise setup System main menu 1、 Press 95+PREVIEWbutton， enter Main Menu。 2、 Move the cursor to[Auto Running Setup] by operate the joystick 1 System upwards and downwards， press[FOCUS+]button to[Auto Running information Setup]‟s next menu。 Move the cursor to[Cruise setup]， press setup [FOCUS+] button and show the menu as:：...
Page 44 7、 Delete cruise setup： move the cursor to [Delete] by operate the joystick， press[FOCUS+]button， when a “☆ ”symbol Cruise serial number 001 appeal infront of [Delete]， it shows the present cruise has been delete。 Preset position time Preset 8、 Press[IRIS+] button back。 position time 01.→000 000;...
Page 45 9、 Press[IRIS-] button exit menu。 Attention： the other three is the same operate method as above。 Variety scan setup move PTZ to the Variety scanning record original position starting 1Serial 99/100 number 001 →2Record use the first preset 3Preview use the first preset position to start 4Delete position to start...
Page 46 7.5 Alarm function setup 7． 5. 1 Alarm function setup System main menu 1、 Press 95+PREVIEW button， enter Main Menu。 Alarm function setup is on the next page of the system main menu， →1 System 2、 When it shows the first page of the main menu， operate the joystick information to show the next page of system main menu，...
Page 47 Whenever theris alarm signal ， speed dome will not respond to „cruise or scan‟and any other functions。 It requit for direct manual control to resume these functions。 No matter speed dome‟s alarm function is On or Off， It‟s alarm output is always has response， Example: Speed Alarm function setup dome‟s alarm function not On →...
Page 48 Date/time setup →Date 07year 07month 7． 6. 2 Definite time change multicolour to black and 07day white Time 08hour 08min Definite time funtion setuphas 8 setting options， Definite time 08sec funtion content： N/A（ Off）、 multicolour、 black and Weekday Saturday white、...
Page 49 Definite time function setup Edit definite time function Definite time function Time 07： 59 18： 59 →1 00： 00 00： 00 →function multicolour 2 00： 00 00： 00 IRIS+:back IRIS-:exit 3 00： 00 00： 00 IRIS+:back IRIS-:exit 7． 6. 3 Definite time function alarm setup System main menu Definite time funtion setuphas 8 setting options，...
Page 50 5、 And now ,the definite time alarm function has been set finish， from 8pm to 8 am alarm function is at On state， if there is any alarm signal， speed dome will turn the camera to the signal output point。 6、...
Page 51 A、 Operate joystick to the right let cursor stop at“00|”， operate joystick upwards to increase,downwards to decrease， adjust to “07”and then move cursor to the right to “00”， operate joystick upwards to “59”， and now, 8am has been set up Clock setup finish；...
Page 52 1） Move the cursor to [Privacy region System main munu setup]， press[FOCUS+]butter to confirm， operate joystick to shift →5 Alarm screen， let the region which needs to protect to show on the screen； 2） Press[FOCUS+] button， screen will show white colour‟s function setup 6 Clock setup shield area，...
Page 53 control delayed Whether matching resistor is in the Install matching resistor in dome camera at the farthest end the dome camera 9. Correspondence of Address and Coding Switches（SW1: DIP1-DIP6） 654321 654321 654321 654321 000001 010010 100011 110100 000010 010011 100100 110101 000011 010100...