Installing Cards & Battery; Powering On/Off The Device - KaZAM Life B2 User Manual

Installing Memory Card
Your device supports micro SD card, which is a multimedia memory card used to
increase the memory of the device. The micro SD card is small and should be
installed carefully to avoid any kind of damage. Please follow the steps below to
install the memory card in the device:
Remove the back cover of the device.
Hold the device with the front facing downwards.
Remove the battery
Slot the micro SD card into the device as shown below.
Replace the battery.
Replace the battery cover until it clicks into place.

2.2 POWERING ON/OFF THE DEVICE

Turning On the Device
After installing the SIM card and charging the battery, you are now ready to turn on
your device.
Press and hold the Power Key to turn on the device.
Turning Off the Device
Press and hold the Power Key for 3 seconds.
7