Specifications; Important Safety Instructions; Product Labels; Installation - Sylvania SIP-S1500M Instruction Manual

11) Horizontal runs should not exceed 1.2 m (4 ft) with a maximum vertical flue
height of 10.6 m (35 ft).
12) This unit should be turned off and allowed to cool prior to cleaning. Any ashes
should be kept in an airtight metal container and not disposed of until they are
completely cooled.
13) Read the instructions thoroughly and save them for future use.
14) Do not allow paint, chemicals or construction dust on or near the unit. Do not
allow liquid or any foreign materials on or inside your unit. Shut your unit
down, let cool and then cover it when painting, during construction or similar
activity. Wipe and clean your unit if any foreign material gets on or inside your
unit. Unplug unit first, and then vacuum and clean the motor and inside of the
unit.
15) Improper gasket maintenance, including failure to replace gaskets, can cause
air leaks resulting in smoke-back problems.
16) This unit is for residential use only, but is not suitable for mobile homes.

SpECIFICATIONS

Model: .................................................................................................................SIP-S1500M
Width: .............................................................................................................55 cm (21.6 in)
Depth: .........................................................................................................52.5 cm (20.6 in)
Height: ........................................................................................................... 75 cm (29.5 in)
Weight: ........................................................................................................80 kg (176.3 lbs)
Hopper capacity: Up to ..................................................................Up to 22 kgs (48.5 lbs)
(Hopper capacity may vary slightly depending on pellet size, length and diameter)
Burn rate: ..................................................................................... Maximum 2 kgs (4.4 lbs)
BTU range: ............................................................................................................28000 BTU
Electrical rating:............................................................................................... 120Vac, 60Hz
Light cycle: ..................................................................................................................... 410W
Continuous cycle .......................................................................................................... 110W

IMpORTANT SAFETY INSTRUCTIONS

PROFESSIONAL INSTALLATION IS REQUIRED FOR THIS STOVE.
The pellet stove must be electrically grounded in accordance with local codes or
with National Electrical code ANSI/ NEPA 70 and CSA-C22.1.
This stove is designed for use with pellatized wood only. DO NOT BURN COAL OR
WOOD LOGS OF ANY kind.
This stove shall be operated with power source for the blowers, exhaust system and
fuel feeding system.
Never block the air supply to or from the stove as it will seriously degrade the
performance and cause smoking and soot.
Do not burn high ash content pellets because it will rapidly fill up the burning pot
and affect the combustion.
The unit is not suitable for mobile homes.

pROdUCT LAbELS

wARning - REAd, undERSTAnd And fOLLOw ALL SAfETy LABELS
And mARKingS On THE uniT.
ACCESSORIES
See below for accessories included with your unit.

INSTALLATION

Remove the factory packaging and find a suitable location according to the follow-
ing guidelines.
cLEARAncE TO cOmBuSTiBLES
This stove must be installed with the following minimum clearances to the sides and
back wall combustible material. Refer to Fig. 1 for vertical installation and Figure 2
for vertical corner installation.
2