Replacement Bulbs; Electrical System; Wiring - Chevrolet Traverse 2015 Owner's Manual

10-28 Vehicle Care
4. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
5. Pull the bulb (2) straight out of
the bulb socket.
6. Push the replacement bulb
straight into the bulb socket and
turn the bulb socket clockwise to
install it into the lamp assembly.
7. Turn the lamp assembly into the
liftgate engaging the clip side
first.
8. Push on the lamp side opposite
the clip until the lamp assembly
snaps into place.

Replacement Bulbs

Exterior Lamp
License Plate Lamp
Rear Turn
Signal Lamp
Taillamp/Stop Lamp
For replacement bulbs not listed
here, contact your dealer.

Electrical System

High Voltage Devices and

Wiring

Bulb
Number
194 LL
Exposure to high voltage can
cause shock, burns, and even
7443 NA
death. The high voltage
components in the vehicle can
7444 LL
only be serviced by technicians
with special training.
High voltage components are
identified by labels. Do not
remove, open, take apart,
or modify these components.
High voltage cable or wiring has
orange covering. Do not probe,
tamper with, cut, or modify high
voltage cable or wiring.
Warning