Setting Up And Connecting; Operation; Milk Froth; Hot Milk - Jura Automatic Milk Frother Instructions For Use Manual

1 Setting up and connecting

1 Setting up and connecting
When setting up your milk frother, please note the
following:
U
Place the milk frother on a horizontal, stable
surface that is not sensitive to water.
U
Choose a spot for your milk frother which is
protected against overheating.
U
In the interests of hygiene, you should use a
damp cloth to clean the machine base and
milk container before starting the milk frother
for the first time. Dry everything thoroughly.
WARNING
J
If the machine is operated with a defective mains
cable, there is a danger of potentially fatal electric
shock.
T Never use a machine which is damaged or
has a defective mains cable.
T Insert the mains plug into a power socket.

2 Operation

You can use your milk frother to heat and froth
milk ( and ) or prepare cold milk froth ( ).
E Always add sufficient milk to the milk
container – at least up to the MIN mark.
E Do not add too much milk to the milk
container – don't fill beyond the MAX mark
for milk froth or the MAX mark for hot
milk.

Milk froth

Example: Proceed as follows to prepare milk froth.
T Insert the frothing disk in the milk container.
It will click into place audibly.
T Add cold milk up to at least the MIN mark
but not beyond the MAX mark .
T Place the cover on the milk container.
T Place the milk container on the machine
base.
T Insert the mains plug into a power socket.
14
T Press the operating key until the symbol for
the desired temperature level lights up.
The symbol selected flashes three times by
way of confirmation. The machine then
starts automatically.
T Wait until the machine stops and the symbol
goes out again.
E You can interrupt the process at any time.
simply press the operating key or lift the
milk container off the machine base.
T Lift the milk container off and pour out the
milk froth. CAUTION! Danger of scalding!
Only hold the milk container by its handle.
Do not touch the heating plate.
T Place the milk container on a heat-resistant
surface or back on the machine base.
T Remove the mains plug and leave the
machine to cool down.
T Always clean the machine after use.

Hot milk

Example: Proceed as follows to prepare hot milk.
T Remove the heating disk from the bottom of
the machine.
T Insert the heating disk in the milk container.
It will click into place audibly.
T Add cold milk up to at least the MIN mark
but not beyond the MAX mark .
T Place the cover on the milk container.
T Place the milk container on the machine
base.
T Insert the mains plug into a power socket.
T Press the operating key until the
symbol lights up.
The symbol flashes three times. The
machine then starts automatically.
T Wait until the machine stops and the symbol
goes out again.
E You can interrupt the process at any time.
simply press the operating key or lift the
milk container off the machine base.
or