Table of Contents
Advertisement
:
Note2
Sent during recorder play only. When there is no data recorded in the applicable recorder track, the MIDI
information of the functions of parts with the same send channel (A01 through A16) is sent.
1.3
Performance Controller Section
The Performance Controller Section consists of keyboard, pedal and other real-time controllers, as well
as blocks that generate auto accompaniment, auto performance, and other performance information.
These messages are transmitted to the sound generator in accordance with operations, while they are
also being sent out as MIDI messages. The channel number of the sent message is in accordance with
Instrument s part number.
1.3.1
Auto Accompaniment and Auto Performance MIDI Send
This document what operation is sent by a message in the case of each message type. However, since
there are so many messages sent by an auto accompaniment operation when auto performance and
Accomp MIDI Out is turned on(PX-350M, AP-650M), those messages are not covered here.
2
Conditions that Disable Message Send and Receive
The main conditions when MIDI message send and receive are disabled by the Instrument are those
described below.
• During storage of registration data(PX-350M, AP-650M)
• While storage is selected as the USB device mode(PX-850,PX-1200GP, AP-450,PX-350M, AP-
650M)
3
Timbre Type Specific Operation
The operation that is performed for a received message depends on the current Timbre Type setting (see
10.1 About Timbre Type ), which is the operation mode of each sound generator part. Applicable
information is provided in the explanations for each message.
8
Hide quick links:
Advertisement
Table of Contents
