Selecting The Conduits For A Modem Hotsync Operation - Palm IIIxe Handbook

Note: If you plan to connect to your company's dial-in server
(network modem) instead of connecting to a computer
modem, see "Conducting a HotSync operation via a
network" later in this chapter.
6. Enter the telephone number to access the modem connected to
your computer.
7. If needed, enter a dial prefix (such as "9") to access an outside line,
and then tap the Dial Prefix check box.
Tip: You can enter a comma in the field to introduce a "pause"
in the dialing sequence. Each comma equals a two second
pause.
8. If the phone line you're using for the organizer has Call Waiting,
select the Disable call waiting check box to avoid an interruption
during the modem HotSync operation.
9. If you want to use a calling card to place the call, select the check
box and enter the calling card number.
10. Tap OK.

Selecting the conduits for a modem HotSync operation

The Conduit Setup dialog box on your organizer enables you to define
which files and/or applications synchronize during a modem
HotSync operation. You can use these settings to minimize the time
required to synchronize data with a modem.
Chapter 6
Tap here
Page 165