Virtual Numeric Keypad; Key Combinations - Fujitsu LIFEBOOK P702 Operating Manual

Working with the notebook

Virtual numeric keypad

Num Lock Virtualnumerickeypad Numeric keypad
To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual
numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers
and symbols printed in the upper right corner of each key. If you have switched on the virtual
numeric keypad, you can output the characters shown on the upper right of the keys.
The keyboard layout shown below may differ from your actual device.
1 = Valid characters when the
key is not activated
Further information about the status indicators can be found in chapter

Key combinations

Keycombinations
The following description of key combinations applies to Windows operating systems. Some of the
following key combinations may not function in other operating systems or with certain device drivers.
Other key combinations are described in the relevant manuals supplied
with your application programs.
Key combinations are entered as follows:
► Press the first key in the combination and keep it pressed.
► While holding the first key down, press the other key or keys in the combination.
Combination
24
Num 2 = Valid characters when the
Description
Sleep mode
Activate Fn+F1
This key combination is used to activate the suspend mode (S3).
is activated
"Status indicators", Page
Fujitsu Technology Solutions
Num
19.