DigiPower TC-1000 Operating Instructions

Travel charger
Hide thumbs Also See for TC-1000:

Advertisement

Operating Instructions for Travel Charger Item # TC-1000/RTC-1000/VTC-1000
PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT.

IMPORTANT WARNING:

This CHARGER is for charging rechargeable Li-Ion digital camera and camcorder batteries ONLY!
Attempting to charge any other batteries may damage the device, destroy the batteries and/or cause injury to the
user. Charging other batteries will void the warranty.

CAUTIONS:

Always unplug the charger when not in use.
Do not store, place or use the charger where it could come into contact with water or moisture.
Always replace frayed or damaged wire and broken plugs immediately.
To reduce the risk of electric shock, unplug your charger from the wall outlet before cleaning.
Do not open or disassemble the charger unit.
OPERATING INSTRUCTIONS:
BEFORE USING THE CHARGER, IT IS IMPORTANT TO GET FAMILIAR WITH THE INTERNATIONAL PLUG
MECHANISM.
FOR USE IN USA:
1. Lift the plug from stored position until it locks in a 90 degrees position.
2. Plug directly into a wall outlet or Power strip.
FOR USE IN EUROPE:
1. USA PLUG REMAINS IN STORED POSITION
2. Remove European plug adaptor by lifting up and out of stored position.
Slide the EU plug into the stored US plug.
3.
Plug directly into a wall outlet or Power strip.
4.
.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TC-1000 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DigiPower TC-1000

  • Page 1 Operating Instructions for Travel Charger Item # TC-1000/RTC-1000/VTC-1000 PLEASE READ THE INFORMATION AND FOLLOW ALL INSTRUCTIONS BEFORE USING THIS PRODUCT. IMPORTANT WARNING: This CHARGER is for charging rechargeable Li-Ion digital camera and camcorder batteries ONLY! Attempting to charge any other batteries may damage the device, destroy the batteries and/or cause injury to the user.
  • Page 2 The TC1000 charger is designed to work with changeable battery plates to fit and charge various Li-Ion digital camera and camcorder batteries. Each TC-1000 is packaged with battery plates, to fit the different battery models from the same camera manufacturer.
  • Page 3 Operating instructions: 1. while the battery is on the charger, connect the base charger to a power source. The LCD panel will light up. The LCD’s charge indicator bars will begin to appear to show the battery charge level. The bars will begin to blink at start of each charging level. Less than 25% capacity the 1 (25%) bar will blink.

This manual is also suitable for:

Rtc-1000Vtc-1000

Table of Contents