Cabinet Disassembly Instructions - FUNAI FL10.1 Service Manual

CABINET DISASSEMBLY INSTRUCTIONS

1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
[1] Stand
Assembly
[14] Junction-A
[2] Rear Cabinet
CBA
[3] Jack Holder
(D)
[4] Digital Main
CBA Unit
[10] Speaker
[7] Main CBA
Holder
[11] Speaker [8] Stand Holder
[9] LCD Module
Assembly
[16] Front
Cabinet
2. Disassembly Method
Step/
Loc. Part
Fig.
No.
No.
Stand
[1] D1 3(S-1)
Assembly
Rear 9(S-2), 2(S-3), (S-4)
[2] D1
Cabinet 3(S-5)
Jack
[3] D2 (S-6)
Holder(D)
4(S-7), (S-8), 4(S-9),
Digital Main D2 2(H-1), *CN301,
[4]
CBA Unit D3 *CN302, *CN3902,
Shield Box
Jack
[5] D2 (S-10)
Holder(A)
D2 4(S-11), CN702,
[6] Jack CBA
D3 *CN861A
[12] Junction-C
CBA
[13] Junction-B
CBA
[5] Jack Holder
(A)
[6] Jack CBA
[15] Function
CBA
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
---
---
---
---
---
---
Step/
Loc. Part
Fig.
No.
No.
D2
[7] Main CBA
D3
Stand
[8] D2 2(S-13), (S-14)
Holder
LCD
[9] Module D2 ---------------
Assembly
Speaker
[10] D2 4(S-15)
Holder
[11] Speaker D2 ---------------
Junction-C D2
[12]
CBA D3
Junction-B D2
[13]
CBA D3
Junction-A D2
[14]
CBA D3
Function D2
[15]
CBA D3
Front
[16] D2 ---------------
Cabinet
↓ ↓ ↓
(1) (2) (3)
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
P = Spring, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
4-1
Removal
Remove/*Unhook/
Unlock/Release/
Note
Unplug/Unclamp/
Desolder
10(S-12), *CN102,
*CN201, *CN801A,
*CN1550, *CN1650,
*CN1750
Desolder
Desolder
Desolder
2(S-16)
↓
(4) (5)
FL10.1DC
---
---
---
---
---
---
---
---
---
---
↓