Dynacord AXM 12A User Manual page 13

AXM 12A
Menu item
MIX OUT
Delay
Dim Time
Dim Bright
Contrast
Load Settings
Save Settings
Factory Reset
Info
Exit
Table 6.1: LCD menu
Bosch Sicherheitssysteme GmbH
Default Range
L+R L+R, R
Off Off, 0.1–100.0
m
30 sec 10–60 seconds
50% 0–100%
0 -10 – +10
F1-F6, U1–U5
U1–U5
- -
- -
- -
User manual
Configuration | en
Description
This menu item is used to select which
signal of INPUT 3 AUX IN should be output
at MIX OUT and which signal should be
delivered by the loudspeaker.
• L+R: The left and right signals of INPUT
3 are summed. The sum is output at
MIX OUT and is delivered by the
loudspeaker.
• R: Only the right signal of INPUT 3 is
output at MIX OUT. The loudspeaker
will deliver only the left signal.
Please refer to section System examples,
page 26 for different MIX OUT applications.
This menu item is used to delay the output
signal, e.g. to compensate for differences in
distance among individual loudspeakers.
This menu item is used to configure the
LCD screen to dim after a certain time of
inactivity. To exit dimmed mode, the
encoder has to be pressed.
This menu item is used to set the
brightness of the LCD screen in dimmed
mode.
This menu item is used to increase or
decrease the visibility of the LCD screen.
Allows loading one of 6 factory or 5 user
settings.
Five user memories are available to save the
current settings. A name can be assigned to
each user setting.
This menu item is used to revert the
loudspeaker to the original factory default
settings. All user settings will be deleted.
This menu item provides information about
the system model and the firmware version.
This menu item is used to return to the
home screen.
18-Mar-14 | 02 | F01U290507
13